Faema - Brewing group

The o ring on this product page can be used on various brands of the La Cimbali group. You can use this o ring with the brands Faema, Cimbali and Casadio. This o ring has been made from EPDM. The cord diameter is 2,62mm and the inner diameter is 9,13mm. this o ring has been made in Italy. You will find this o ring for instance on the Casadio Dafne,...

This brewing group spare part is used on various older Faema brewing groups. The Faema part reference number for this item is 3161116451.  This valve part is used in the exhaust side of the brewing group. This valve part has been made from machined brass. on the inside of the gasket holder is a gasket already installed. This item has been made in...

Faema E61 brass camme lever rod

The portafilter gasket shown on this page can be used on a variety of espresso machines which use for instance a E61 style of brewing group. But this gasket hasn’t been made from the traditional NBR, but from orange food grade silicone.  You can use this portafilter gasket on various brands such as San Remo, La Scala, Vibiemme, Bezzera, Faema...

On this product page you will find a flat PTFE gasket which can be used in various applications on Faema and Casadio espresso machines. This flat PTFE gasket can be used in brewing group applications and water and steam valves. The Casadio part reference for this item is 4701116694, the Faema part reference is identical to this number. This ptfe gasket...

This PTFE gasket can be used on the famous Faema E61 brewing groups, but also on a variety of E61 style of brewing groups. Like with La Scala, Grimac, Pavoni, Wega and Fiorenzato. The part reference numbers can be found in the extra info tab. This flat gasket is made from the material PTFE. The outer diameter is 36,5mm and the inner diameter is 30mm and...

This nozzle/gigleur is installed primarily in the brewing group on a espresso machine. It has a hole diameter 0,6mm. There are a variety of diameters available. The thread used on the part is a male M6 with a pitch of 0,75mm. The thread pitch can vary between 0,75mm and 1mm keep that in mind. But also the diameter of the nozzle can vary, so expect when...

This wire filter is used in a variety of Faema E61 brewing groups, such as the classical E61 but also the more modern E61 Jubilee and the E61 Legend. This filter has the Faema part reference number 4771135894 This filter is made from stainless steel. The outer diameter is 10,5mm and the thickness is 0,3mm. This item is made in Italy.

The item on this product page is a item which can only be used on the Faema E61 brewing groups. So it is not suitable to use on the E61 style of brewing groups. The Faema part reference number for this item is903828000.  This drain valve is used in the bottom section of the brewing group, all the way at the end. This item is made from machined...

The compression spring on this product page is used on various water inlet systems of Astoria CMA espresso machines. You will find this spring with the brands Astoria and Wega. The part references for Astoria are 10451 and for Wega W10545/WY10451. This stainless steel spring has a outer diameter of 14mm and a overall length of 45mm. You can use...

The function of a shower screen is to spread the water coming out off the group on a equal way over the coffee. One of the standardized sizes and most common, is the 60mm shower screen. This shower is a pressed model made by IMS IMSDR300. The outer diameter is 60mm, the internal height is 17mm and the diameter of the punctured holes is 2,5mm Note: this is...

On this page you will find a camme guide bushing. This part is a generic part for Faema E61 brewing groups and the brewing groups made in the E61 style. This part is made from brass with a total length of 28mm, the outer dimensions are 15 and 10 mm. The ID is 8mm and the head of the bushing has a thickness of 5mm. This part slides over the shaft off the...