Filter by
Price
Manufacturers
Coffee grinder part type
Type
Filter

Fiorenzato F5 GA coffee grinder parts

The coffee grinder on this page is made by the Italian company Fiorenzato M.C.  This grinder is the Fiorenzato F5 GA, a doser coffee grinder, which is ideal for commercial applications. This coffee grinder can also be used in a domestic situation, but it would be a bit too much.

This coffee grinder is equipped with a doser on the front of the coffee grinder. This doser can hold a certain amount of pre-ground coffee, when you need coffee it is always ready. The disadvantage of this is that the coffee used is not so fresh as with a doserless coffee grinder.

The Fiorenzato F5 GA has a version which runs on single phase 230V as well as single phase 110V. But there is also a 3 phase 380V version available, this type is less common then the single phase. But this model does not require a start capacitor

The grinding burrs used on this coffee grinder is a flat type with a right turning direction. The external diameter is 64mm, the internal diameter is 37mm and the thickness is 8,5mm. there are 3 fixing holes for this burr set.

Fiorenzato M.C. burrs spring

The grinding burr locking spring is a OEM/Original Fiorenzato coffee grinder spare part. The Fiorenzato part references for this item are 001.002.011 and 700000001. These compression springs are used in combination with the grinding burrs. These compression spring has been made in Italy. You can use these compression springs on basically every...
€1.80

Fiorenzato M.C. siemens contactor 3TG1010-1AL2

The item on this product page is a Siemens contactor. This contactor can be used on various coffee grinders made by Fiorenzato. The Fiorenzato part reference number for this contactor is 600000018, the Siemens part reference number is SIE3TG10101AL2. This Siemens contactor is called the 3TG1010-1AL2. This contactor is rated up to 8,4A at 400V 4Kq. The...
€73.19

Fiorenzato M.C. doser counter

The item on this page is a OEM/Original Fiorenzato spare part. this item is a grinder doser counter, which has been made in Italy. The Fiorenzato part reference number for this doser counter is 200000039 This compression spring can be used in various Fiorenzato models such as the Fiorenzato F4A, Fiorenzato F5, Fiorenzato F5 Ghiera, Fiorenzato F6,...
€45.36

Fiorenzato doser adjustment knob

The item shown on this product page is used on various Fiorenzato doser coffee grinders. This specific item is a adjustment knob which can be found on the bottom of the doser. This spare part is a OEM/Original Fiorenzato spare part. The Fiorenzato part reference numbers for this item are 001.003.012  and 400000003. This Italian made adjustment knob...
€17.53

Fiorenzato coffee collector

The coffee collection tray on this product page is a OEM/Original Fiorenzato spare part. This item has the part reference of 300000021. This tray for ground coffee has been made from pressed stainless still with a shiny finish. This item has been made in Italy. You can use this collection tray on a wide selection of Fiorenzato coffee grinders such as the...
€37.87

Fiorenzato aluminium doser star assembly

The item on this page is not a individual spare part, but a complete assembly. This assembly is a OEM/original Fiorenzato coffee grinder spare part. This item is a complete doser star. The Fiorenzato part references for this item are 001.003.050, 300000070, 800000027, 800000027+, 800000028, 900000039, 900000124, 900000126 and 900000126/R. This doser...
€52.32

Ducati Energia capacitor 12,5µF 450V

The capacitor on this page is a 12,5µF model. This model is manufactured by the Italian company Ducati Energia. The part reference for this item is 41610.1764. This capacitor is used as a start capacitor for the coffee grinder motor. This capacitor can be found with brands such as Cimbali, Faema, Bezzera, Nuova Simonelli, Mazzer, Brasilia, Macap. This...
€9.09

Fiorenzato M.C. adjustment pin

The item on this page is a Fiorenzato OEM/Original spare part. With this adjustment pin you can change your grind settings. The Fiorenzato part reference for this item is 001.003.052 and 400000011. The adjustment pin has been made from stainless steel. The pin has a diameter of 7mm and a length of 50mm. The thread used is a M5. This item has been...
€8.22

Fiorenzato F5 grinding burrs 64mm original

The grinding burrs on this product page are OEM/Original Fiorenzato spare parts. The Fiorenzato part reference number for these grinding burrs is 400000005. These grinding burrs are from the flat type and have a right turning direction. The external diameter is 64mm, the internal diameter is 37mm and the thickness is 8,5mm. There are in total 3 mounting...
€92.44