0
My cart
Home
Nuova Simonelli Victoria Arduino hydraulic valve body 5 way
The item on this product page is a hydraulic valve body. This item is a OEM/original Nuova Simonelli and Victoria Arduino spare part. This item has the Nuova Simonelli part reference of 06200084
This brass casted block is used in various water inlet valves of Nuova Simonelli and Victoria Arduino. This item has been made in Italy.
You can use this valve...
€41.79
Ronda AP292 coffee knock box
The coffee drawer on this page is made by the Italian company Ronda. This coffee knock box is a build in knock box. This model is the Ronda AP292.
This box has been made from stainless steel. But this drawer is completely covered with a plastic box to prevent odours. The front of the drawer has shiny surface finish.
This drawer is 377mm by 164mm and a...
€267.11
Elektra heating element gasket 55x42x2mm
The item on this product page is a heating element gasket which can be used on various Elektra espresso machines. The Elektra part reference for this item is 00499035.
This heating element gasket has been made from AFM 34, made by Victor Reinz. The outer diameter is 55mm, the inner diameter is 42mm and the thickness is 2mm. This gasket has been made in...
€4.47
Heating element gasket 56x42x2 mm
The item on this product page is a heating element gasket for various Bezzera and San Remo espresso machines. The San Remo part reference for this item is 10502020 and for Bezzera the part reference is 5494016
This heating element gasket has been made from PTFE. The outer diameter is 56mm, the inner diameter is 42mm and the thickness is 2mm.
You can use...
€5.67
Mazzer Mini A Electronic push button membrane
On this product page you will find a OEM/Original Mazzer spare part. The item shown on this page is a touchpanel membrane. This membrane can be used on the Mazzer Mini A electronic.
The Mazzer part references for this item are S000MEM01, S000MEM01-A and S000MEM01/A
This is the sticker where the keys are integrated in, this item does not include the...
€35.22
Mazzer Mini A electronic pushbutton board
The touchpanel board on this page is a OEM/Original Mazzer spare part. This item is suitable for the Mazzer Mini A electronic. The Mazzer part reference for this item is S000SPU01/A.
This touchpanel board is located underneath the membrane. The left key is for single dose, the right key for double dose and the middle one is the push button for manual...
€92.89
Rancilio Silvia V1/V2 Steam valve knob
The steam valve knob on this page is a OEM/Original Rancilio spare part. This item has the Rancilio part reference of 38121037.
This steam tab knob is suitable for the earliest models of the Rancilio Silvia. The Rancilio Silvia V1 and the Rancilio Silvia V2. This steam knob does not come with the handle spring.
€14.01
Nuova Simonelli / Victoria Arduino pressure sensor 3/8"M
This pressure transducer is used by Nuova Simonelli and Victoria Arduino (the same company). The item is being used on the Victoria Arduino Adonis, Victoria Arduino Black Eagle, Victoria Arduino VA358 White eagle and on the Nuova Simonelli Aurelia II
€200.89
Non return valve 1/8"FF
This non return valve on this product page can be used on various Victoria Arduino espresso machines. The part reference for this item is 98110001.
The non return valve on this page has on both sides a female 1/8” BSP-G thread. The length of this item is 31mm and the size of the nut is 13mm. This item has been made in Italy.
You can use this non return...
€13.41
Nuova Simonelli / Victoria Arduino cartridge heating element
On this page you will find a OEM/Original Victoria Arduino and Nuova Simonelli brewing group heating element. This cartridge heating element keeps the brewing group at a pre-set temperature.
This cartridge heating element produces 300W at 230V. The cartridge itself has a outer diameter of 10mm and a overall length of 115mm. The length of the cable is...
€105.42
Victoria Arduino VA388 electronic board volumetric 230V
On this product page you will find the volumetric electronic board for the Victoria Arduino VA388 Black Eagle. This OEM/Original circuit board is the model VA388 T3 VOL AVRVAT3220V. The Victoria Arduino part reference for this item is 04901152
The circuit board has the dimensions of 169mm with a 160mm.
€964.04
Victoria Arduino VA388 Black Eagle touchpanel
On this product page you will find a touchpanel for the Victoria Arduino VA388 black eagle. The Victoria Arduino part number for this item is 04901160
This touchpad has 3 push buttons. The dimensions of this board is 85x66mm. This board has been manufactured in Italy.
€326.17
Victoria Arduino Black Eagle low steam tap cover
The item on this product page is a OEM/Original Victoria Arduino spare part. This item has the part reference of05002240 .
This body panel is used to seal of the lower front section of the steam and water valve on the Victoria Arduino VA388 Black Eagle. This item has been made in Italy.
€28.40
Nuova SImonelli grinding blades RH titanium
The grinding blades on this page have a gold shiny colour, looks different then the grey coloured burrs. These burrs are original burrs for the VA and NS Mythos 2 grinders but have a titanium coating.
The outer dimension of this burr is 82,5mm and the internal dimension is 49mm and the flat burrs have a thickness of 9,6mm. This blade is a blade which...
€423.74
Nuova Simonelli bipolar switch MDJ 1011.0052
The switch on this page is original switch used on the VA and NS Mythos 2 coffee grinder. This specific model is a on/off switch. This switch has the following specifics 18A (AC-1) / 15A (AC-3) 220-240V
The part is used on the Victoria Arduino Mythos 2 with the part number 15070053. The Nuova Simonelli Mythos 2 part number is identical 15070053.
If you...
€69.51
Vibiemme steam valve knob insert
The steam valve knob insert on this page can be used on a variety of Vibiemme espresso machines. The part reference of this item is MANPDIVAEVORE. The suitable knob can be found in the accessory tab below this item.
You can use this steam valve knob insert on the following espresso machines. Vibiemme Evolution, Vibiemme Kometa, Vibiemme Minimax, Vibiemme...
€6.08
Vibiemme heating element 3500W 220V
The element on this product page is suitable for Vibiemme 2 group espresso machines (ELETRESMI3522). This specific model is suitable for the Vibiemme Replica and the Vibiemme Chimaera.
The element can generate 3500W with 220V on 50/60Hz. The element has 4 poles, with a thread and bolt connection. The element has a copper heating element with a brass...
€76.02
Bezzera thermal PID 230V
The item on this product page is a OEM/Original Bezzera digital thermostat. The Bezzera part reference number for this item is 7434018
This PID has been made by the Italian company Gicar. This specific thermal PID can be used on a 230V model of Bezzera espresso machine. This item has been made in Italy.
You can use this PID on the Bezzera Unica espresso...
€241.27
Bipolar lever switch 15A 250V
The bipolar switch on this product page can be used on various espresso machine brands such as San Remo and Bezzera. The San Remo part reference for this item is 10553060 and the Bezzera part reference is 7633326.
This bipolar toggle switch is rated for 15A at 250V. The thread and nut are a M12x0,75mm. This switch has been made in Italy.
This switch can...
€17.48
Bezzera green indicator light 110/230V 25W
On this product page you will find a OEM/Original green indicator light. This item is a OEM Bezzera spare part. The Bezzera part reference for this item is 7633624 .
This indicator light produces 25W and can run on 110 and 230V. The head has a diameter of 13,4mm and the mounting hole diameter needs to be 10mm. This indicator light has been made in Italy....
€5.41
ECM capillary tubing 1/8"FF
The item on this page is a capillary tube used for attaching a manometer to a boiler. This model of Capillary tubing can be used on various ECM Heidelberg espresso machines. The ECM Heidelberg part reference number is P6051
This copper capillary tubing has on each side a female 1/8” fitting. This item has been made in Italy.
You can use this capillary...
€21.20
ECM Heidelberg stainless steel steam wand
The steam tube on this page can be used on various ECM Heidelberg espresso machines. The ECM Heidelberg part reference number for this item is P6002.
This steam tube has been made from stainless steel. the outer diameter of the tube is 10mm. The tube has been fitted with a anti scorch sleeve. The developed length is 250mm. The steam tip has in total 2...
€144.47