La Cimbali M22 - Brewing group

On this product page you will find a single portafilter for various La Cimbali espresso machines. The La Cimbali part reference for this item is 537-027-100. This portafilter has been made from casted brass and has been chrome plated. The ear orientation is 90 degree. The thickness of these ears is 5,5mm. The portafilter comes with a single spout. This...

This o ring is one of the most common parts in the world of espresso machines. The main function of this o ring is to seal off a flanged solenoid valve. Every flanged solenoid valve uses 2 of these. But you will also find them in applications like steam and water valves and water inlet taps. The o ring has a wire diameter of 1,78mm and a internal...

The nozzle/gigleur is used on a couple of Cimbali brewing groups. This nozzle is not located inside the brewing group, as you see with most gigleurs. But it is installed inside the tubing at the flowmeter or close to the brewing group. This item has multiple part numbers you will find those at the extra info tab. This gigleur has a outer diameter of 14mm...

It is quite common on espresso machines that the shower screen in the brewing group is attached with a screw. The issue is that the space between the brewing group and the drip tray is quite often too little for a normal screwdriver. For that reason we have the Wera short version screwdrivers. This specific model is suitable to use in combination with a...

The hex screw on this page is used on various La Cimbali espresso machine brewing groups. The part reference number for this item are 593815000 and 593815010  This head bolt keeps the portafilter coupling ring in place. The thread used on this nut is a male M6. The length of this screw is 29mm, the item has been made in Italy. Note: there are various...

The single coffee stainless steel filterbasket on this page can be used with a variety of La Cimbali espresso machines. This item has been made in Italy by IMS filtri with the part reference GC1T044 The 1 cup coffee filter basket has a outer edge diameter of 68mm and a height of 22,5mm. The hole pattern is located in a diameter of 30mm.  The filter...

The o ring on this page is a red Silicone o ring used in the most commonly used La Cimbali Brewing group. This gasket makes on multiple locations a seal between the 150mm/210mm HX tube and the brewing group head and the HX and the boiler flange. There are multiple Cimbali part numbers such as 401178002, 401-178-002, 401178012 and 401-178-012....

The shower screen on this product page is from the type a precision shower screen or competition. This shower screen is made by the Italian company IMS Filtri and can be used on various espresso machine brands such as Astoria, Bezzera, Elektra, Casadio Faema, La Scala, Victoria Arduino. This model is Called the CI 35 WM, with the part reference number...

On this page you will find a stainless steel plug. This OEM/Original part is made by the Cimbali group. This item can be used on various applications such as in a brewing group and water inlet valve. The part number for Casadio is 457347010 and for Cimbali it is 457347000. This plug is made from stainless steel and has a 3/8” BSP-G thread. The...

The item on this page is the portafilter holder of the brewing group. These portafilter coupling bells do get damaged over time, or just wear down. Then you can replace this section instead of replacing the entire brewing group. This part is a OEM/original Cimbali spare part and matches with the part reference numbers 457-299-027, 457299027, 457-299-017,...

On this page you will find a stainless-steel wire mesh filter. This filter is placed before the gigleur/nozzle so that it won’t get blocked by some sort of foreign debris. The La Cimbali part number for this item is 481361000  This stainless-steel filter has a outer diameter of 9mm and the filter has a thickness of 1,5mm. On which models can...

The nozzle/gigleur is used on a couple of Cimbali brewing groups. This nozzle is not located inside the brewing group, as you see with most gigleurs. But it is installed inside the tubing at the flowmeter or close to the brewing group. This item has multiple part numbers you will find those at the extra info tab. This gigleur has a outer diameter of 14mm...