La Spaziale Professionale

The rotation pump on this page is made by Fluid o tech. This model of pump is designated as a Compact model. The pump has the Fluid o tech code CA0104AGAFN0000 or CA0104AGANN0000. This specific model of Fluid o tech pump is type which is called a clamp ring pump. This pump type is mated against the face of a espresso machine motor and a clamp is placed...

The solenoid valve on this page is a 3 way solenoid valve, mainly with the application as a brewing group solenoid valve.  Parker has listed this part under 471012 and 471013 The coil used on this solenoid valve is a 9W 220/240V which runs on 50/60Hz. The coil number for this solenoid valve is 483510S6 The valve in question is a 3 way solenoid...

This type of gasket you don’t see that often with coffee machines. A blind gasket. This blind gasket is made from a fibre material. The outer diameter of this blind gasket is 11,5mm and the thickness is 2mm. Where is this OEM article used for? This is used in the hydraulic systems of most La Spaziale espresso machines. The blind gasket is located...

The item on this product page is a OEM/original La Spaziale spare part. This item is a stainless steel washer, mainly used on older steam and water valves. The La Spaziale part reference number for this washer is 00241 The outer diameter of this washer is 25mm, the inner diameter is 17mm and the thickness is 1mm

The triangular non return valve on this page can be used in La Spaziale and Vibiemme espresso machines. This brass made part holds a small o ring which is 1,78x8,73mm. The o ring seals off the non return valve and non return valve makes sure that the water van only flow one way. The triangular shaped non return valve has a diameter of 6,5mm and 12mm. The...

In some cases, the shower screen is attached with a screw, in most cases that is a Philips or a slotted screw. It is difficult to remove it with a regular screwdriver due to the limited height under the brew group.  But for that you need a shortened slotted screwdriver, in this case the one from the German brand Wera, which fits well under the brewing...

This flowmeter, manufactured by the Italian company Gicar, can be found on a lot of La Spaziale espresso machine models. This specific flowmeter has both female connections of ¼”BSP and it can operate up to 20bar. The nozzle installed in the flowmeter has a diameter of 1,15bar. The base is made from low lead content brass CW510L and is NSF...

On this page you will find a brass valve shaft. This brass valve shaft is made by La Spaziale. The La Spaziale part number for this part is 00232. The steam valve shaft has a threaded section, which screws into the valve body with no 00218. On the shaft there is also a recess for a o ring to seal off the shaft. And at the end of the round shaft they have...