The steam and water valves on the San Remo Milano LX espresso machines is a combination of manual and solenoid valve operated valve. The steam valves are operated manually and the water outlet, for the tea, is a solenoid operated valve.
The manual steam valve on the Milano LX espresso machine is a universal type of steam valve which is used on a variety of espresso machine brands. Note: for this valve you have 2 universal types a conical model and a flat one. These are not interchangeable with each other. This valve has a swivel joint steam tube, this makes it possible to orient the steam tube in various directions.
The water outlet, for the tea water, is a electronic valve. This valve is operated with a 2 way solenoid valve. The outlet is fitted with a swivel joint, to move it a bit. In the bottom of the outlet is a wire filter installed for small debris.
This flat PTFE gasket shown on this page is used on a variety of espresso machine brands in the steam and water valves. This gasket can be used on the San Remo, Royal, Brasilia and ECM Heidelberg espresso machines. This flat PTFE gasket has a outer diameter of 20mm a inner diameter of 17mm and a thickness of 2mm. This gasket has been manufactured in...
The steam valve bushing on this page is used in one of the most common steam and water valves used. This item can be used with brands such as Marzocco, La Carimali, San Remo, La Scala, Faema, La Pavoni and BFC. Against this brass bushing seats a valve shaft spring. This bushing pushes against 2 o rings which seal off the steam valve shaft. This bushing...
This steam and water valve compression spring is one of the most used compression springs. You will find them with a variety of espresso machine brands such as Faema, Pavoni, La Scala, Vibiemme, la Marzocco and San Remo. The part references can be found in the extra info tab. This stainless-steel compression spring has a outer diameter of 10,5mm and a...
The o ring on this page is used to seal off the steam tip from the steam wand at the bottom. You can find this o ring with a variety of brands like Spaziale, Astoria and Wega espresso machines. With the part numbers of Spaziale 08354, Astoria 12300013 and Wega WY12300013. This o ring has a cord diameter of 1,2mm and a internal diameter of 6mm. The o...
The o ring on this product page can be used on various espresso machine brands such as Nuova Simonelli, Victoria Arduino and La Spaziale. The part reference for Spaziale is 08289 and for Nuova Simonelli and Victoria Arduino it is 02280037. This o ring is made from EPDM. The cord diameter is 2mm and the inner diameter is 16mm. This o ring has been made in...
The item on this product page is a M6 washer, this washer can be used on various steam and water valves. Such as the brands Marzocco, Royal, Carimali and San Remo. The Carimali part reference is 93.00058, the Marzocco reference is L165/9 and for San Remo it is 10402040. This flat washer is made from zinc plated steel, this is not a issue seen its not in...
The item on this product page is a crushable copper gasket. This gasket can be used with a variety of espresso machine brands and applications. You can use this gasket with brands such as Cimbali, Faema, Vibiemme and Pavoni. The part reference for this item is for Faema 4701135891, for Pavoni 362000/362007/362075, for Vibiemme GUARTACHGR. This round...
The steam tube grip on this page is suitable for steam tubes of 10mm in diameter. If you click this steam tube around your stainless steel or chrome plated steam tube you will never have the issue of burning your hands on the tube. This rubber grip has part references to Brasilia espresso machines 11972.0.00.02 and San Remo espresso machines with...
The compression spring on this product page can be found with a variety of espresso machine brands. It is used for applications in the steam and water valve with brands such as Victoria Arduino, Nuova Simonelli, la Spazaiale, Elektra and San Remo. The Spaziale part reference is 07568, The San Remo reference is 10402043, For Carimali it is...
The item on this product page is a steam and water valve shaft, including gasket holder. This item can be used on various espresso machine brands such as Marzocco, San Remo, Vibiemme, La Scala, Faema, La Pavoni. The part reference numbers can be found in the extra info tab. This steam and water valve shaft has been made from low lead content brass. On...
This blind gasket can be found on a variety of steam and water valves. You can find this blind gasket with brands such as La Scala, Marzocco, La Carimali, San Remo, Vibiemme, La Pavoni and BFC. The part references can be found in the extra info tab. This gasket is made from red silicone. The gasket has a outer diameter of 12mm and a height of 5.8mm....
This steam pipe bushing is a important element in the sealing and functioning of a steam and water valve. This bushing is pushed down on one side with a spring, this bushing has on the other side a hollow shape so that the ball of the steam and water valve can slide smoothly over the brass. This brass bushing has multiple dimensions. The external...
Cookie | Provider | Purpose | Expiry |
---|---|---|---|
PHP_SESSID | brooks-parts.com | The PHPSESSID cookie is native to PHP and allows websites to store serialised status data. On the website it is used to establish a user session and to pass state data through a temporary cookie, which is commonly known as a session cookie. These Cookies will only remain on your computer until you close your browser. | Session |
PrestaShop-# | brooks-parts.com | This is a cookie used by Prestashop to store information and keep the user's session open. It stores information such as currency, language, customer ID, among other data necessary for the proper functioning of the shop. | 480 hours |