Vibiemme Replica electrics parts

On this page you will find a main power switch for a espresso machine. In this case the switch is manufactured by the Italian company Bremas (CS0179505). The specific switch is a espresso machine switch with 3 positions. 0-1-2-3. It is rated at 300V with 16 amp. The switch is provided with the switch itself, mounting plate and transparent cover plate and...

The espresso machine brand Vibiemme (ELETPULCMDOM) used a variety of black bipolar switches, for various applications. In this case for machines which don’t have a dosing device, a start and stop to control the brewing process. This specific bipolar switch needs a mounting hole of 28x28mmm and is rated for 16A at 250V. When the bipolar switch is...

This dosing device Dosatura 3d5 Plus 3PID 240Vac, with the Gicar code 9.5.22.37G is being used for Vibiemme espresso machines (ELETDOSKIMREP). Mainly for the dual boiler espresso machines Vibiemme Replica and Vibiemme Chimaera. The dosing device runs on 240Vac with 50/60Hz and is suitable for Vibiemme espresso machines up to 3 brewing groups. If you are...

This product can go together with the elliptical push button of 17x13mm. The product is made from a type of plastic and has a chrome plated finish. If you want to mount this item you need to have a mounting hole of 21x17mm. This specific chrome push button housing can be used with Astoria Sibilla (15373058) and with various models of Vibiemme...

On this page you will find the Gicar espresso machine Level regulator RL30/1E/2C/C which is suitable to be used at 230V.  The Gicar code for this item is 9.1.40.12 and 9.1.40.12G. This specific model of level regulator is used on Vibiemme (ELETREGLIV) espresso machines. On the following models: Vibiemme Domobar Super, Vibiemme Minimax and the non...

If the touch panel unit of your Vibiemme Replica and the Vibiemme Cubo espresso machine is broken, you likely need a new one. The specific model is made by Italian manufacturer Gicar (9.9.08.71G). This specific model doesn’t have a finished front, seen it is installed behind a metal plate with holes in it for the push buttons. The push buttons do...

On this page you will find a push button for a electronic board/dosing unit for a espresso machine. This chrome plated is made from a plastic and has a elliptical shape. To be precise 17x13mm. This type of push button is normally used in combination with a push button case(which goes around it) This specific model of elliptical push button is used with a...

Probably the most used pressure switch used on the Asco P302/6 a 3 phase pressure switch. This pressure switch has been used espresso machines like: La Marzocco, Faema, Cimbali, Astoria, Wega, Nuova Simonelli, La Spaziale, San Remo and so on.The brand Asco used to be the company Sirai, since a while this name has changed but the product remains the same....

On this page you will find a NTC thermistor sensor, or just NTC. These probes are connected to a PID, this sensor basically reads the temperature inside the boiler. This specific item is used with the Rocket R 60V and the Rocket R58 espresso machine (A199904679). But this NTC probe is also used in a variety of Vibiemme models like the Vibiemme Domobar...