Wega Orion

The drain tub on this page is one of the most commonly used ones on Astoria and Wega espresso machines. The part is a OEM/Original spare part for Astoria and Wega espresso machines. The Astoria part number is 15502 and the Wega part number is WY15502. This drain cup has been made from a plastic. The outer diameter of the cup is 80mm. The hose...

The heating element gasket on this page can be used on a variety of heating elements. This gasket has a outer diameter of 57mm a inner diameter of 43mm and a thickness of 3mm. The fibre material used is AFM 34 made by the German company Victor Reinz. This gasket material is food safe and can handle the pressure and temperatures which occur in every...

In some cases, the shower screen is attached with a screw, in most cases that is a Philips or a slotted screw. It is difficult to remove it with a regular screwdriver due to the limited height under the brew group.  But for that you need a shortened slotted screwdriver, in this case the one from the German brand Wera, which fits well under the brewing...

The brass washer on this product page is used in various espresso machines made by Astoria and Wega. The Astoria part number for this item is 25655 and the Wega part number is WY25655. This brass washer has a outer diameter of 12mm a inner diameter of 8mm and a thickness of 1mm. This washer is used to spread the pressure of the steam and water shaft...

The paper shim on this page is one of the most widely used paper shim. You can use this type with a wide selection of espresso machine brewing groups. What are the dimensions of this paper shim? They have a outer diameter of 73mm, a inner diameter of 59mm and a thickness of 0,8mm. What does a paper shim do? Brewing group locking mechanisms wear due to...

The stainless steel filter on this page can be used in a variety of applications like in hydraulic systems, pump inlets and in water inlet valves. This model of stainless steel filter is mainly used with Astoria CMA branded machines. The Astoria part number is 10254 and the Wega part number is WY10254  This dome shaped stainless steel wire mesh...

This nozzle/gigleur is installed primarily in the brewing group on a espresso machine. It has a hole diameter 0,6mm. There are a variety of diameters available. The thread used on the part is a male M6 with a pitch of 0,75mm. The thread pitch can vary between 0,75mm and 1mm keep that in mind. But also the diameter of the nozzle can vary, so expect when...

This shaft retaining ring is mainly used on the Astoria and Wega steam valve axles. This is done to keep the valve gasket holder attached to the valve axle. The part number used for this item by Astoria is 10001 and for Wega is it WY10001  This shaft retaining ring has a internal diameter of 6mm a external diameter of 12,3mm and a thickness of...

The function of a shower screen is to spread the water coming out off the group on a equal way over the coffee. One of the standardized sizes and most common, is the 60mm shower screen. This shower is a pressed model made by IMS IMSDR300. The outer diameter is 60mm, the internal height is 17mm and the diameter of the punctured holes is 2,5mm Note: this is...

The steam wand on this page is suitable for a variety of Astoria espresso machines. This part has the Astoria part number 25763116. The stainless-steel steam tube has a diameter of 8mm. The steam tube itself comes with a rubber heat protector, so you won’t burn your fingers while holding the steam wand. The stainless-steel steam stem has a...

This brass nut you will find on almost every steam and water valve of the Astoria CMA group. This brass nut holds the steam and water valve shaft in place inside the gasket holder. The Astoria part reference for this item is 25461 and the Wega part reference for this item is WY25461  You can find this item basically on every model like the Astoria...

One of the most universal items. The male brass plug. The plus on this page can be found in the catalogue of a variety of espresso machine manufacturers like Astoria, Faema, La Spaziale and Wega. This specific plug has a male ¼”BSP-G thread. The height of this plug is 13 mm and the wrench size for this plug is 17mm.