Astoria Sabrina - Brewing group

The portafilter gasket on this page is a original/OEM Astoria CMA portafilter gasket. This gasket is a original item for Astoria and Wega. This gasket notes CMA. The outer diameter of this gasket is 72mm the inner diameter is 56mm and the thickness is 8mm. The gasket has 3 internal cuts. You can use this gaskets on the brewing group Astoria Divina,...

The o ring on this product page can be used on various Astoria and Wega brewing groups. The part reference for this item is for Astoria 12300027 and 12336001. For Wega the reference is WY12300027. This o ring has been made from silicone. The cord diameter is 3,53mm and the internal diameter is 25,8mm. This o ring has been made in the UK. You can use...

On this page you will find a portafilter gasket suitable for various brands like Grimac, Astoria, Bezzera, Wega and Brasilia. This portafilter gasket is made in Italy. The outer diameter of the gasket is 72mm, the inner diameter is 56mm and the thickness of is 8mm. You can use this portafilter gasket on brewing groups like the Grimac G11, Brasilia...

This shower holder diffuser plate is used in variety of Astoria and Wega espresso machine models. The Astoria part references for this item are 25422004 and 25422008, for Wega the references are WY25422004 and WY25422008  This diffuser plate has a outer diameter of 31,5mm. the male thread is a M18 with a pitch of 2mm. The inner thread for...

The solenoid valve on this page is a 3 way solenoid valve, mainly with the application as a brewing group solenoid valve.  Parker has listed this part under 471012 and 471013 The coil used on this solenoid valve is a 9W 220/240V which runs on 50/60Hz. The coil number for this solenoid valve is 483510S6 The valve in question is a 3 way solenoid...

This 3 way solenoid valve is one of the most commonly found solenoid valves. The part is produced by Parker in Italy. This valve is mainly used as a brewing group solenoid valve. The remaining water from the group comes out of the outlet at the top. The Parker part numbers for this item are 393107J and 393112J This solenoid valve is a 3 way valve. The...

The double portafilter shown on this product page is a OEM/Original Astoria espresso machine spare part. The Astoria part reference for this item is 27311051 and 8327311051R. Note, this is the reference for the body 27311000. This single portafilter has a open spout, this make it easier to clean your portafilter. The ear orientation is 45 degree....

The fitting on this page is a plug which can be used on various Astoria and Wega espresso machines. The Astoria part reference of this 25789306 and the Wega part reference is WY25789306. This cap has a male thread and a outer diameter of 18mm. the item has been made in Italy. You can use this plug on the Wega Start, Wega Venere, Astoria Divina,...

On this product page you will find a portafilter gasket suitable for brewing groups from the Astoria CMA group. This portafilter gasket can be used on variety of models from Astoria and Wega. The Astoria part number for this item is 12215 and the Wega part number is WY12215. The portafilter gasket has a outer diameter of 72mm a internal diameter of 56mm...

When you want to clean your portafilter at the end of the day you need to remove the filter basket from the portafilter. But these baskets are normally held in place with the internal spring and can be difficult to remove. Instead of removing the basket with a spoon IMS Filtri has made a filter basket removal tool. This tool is made from stainless...

The product on this page is a solenoid valve connector, large F fitting. With this connector you can seal off and connect your wiring and solenoid valve to each other. These connectors can be used on all types of standard solenoid valve coils. Where the positive and negative are spaced apart approx. 17mm. This solenoid valve connector can be basically...

The portafilter on this product page is suitable for a broad selection of Astoria espresso machine models. The Astoria part reference for this item is 27311051  and 8327311051R  This double portafilter has a open spout, this spout has a thread of 3/8” BSP-G. The orientation of the ears is 45 degree. The portafilter does have a ear...