Bezzera B6000

The 2 coffee filterbasket on this page can be used a big variety of espresso machine brands. You can use this basket on brands such as Casadio, Brugnetti, ECM Heidelberg, San Remo, Faema, Vibiemme, La Scala, Grimnac. This filterbasket has been made by the Italian company IMS Filtri. The IMS part reference is CF2T068. Note: this is not a competition...

The item on this product page is a o ring used on various espresso machine brands. You can use this o ring on brands such as Bezzera, Brasilia, Cimbali and La Pavoni. The Bezzera part reference number is 7496029, for Brasilia it is 00842.0.00.02 and 0084200002, for Cimbali it is 401393000 and 401-393-000. The reference number for La Pavoni is 430033....

The item on this product page is a flat EPDM gasket which can be used on various Bezzera and La San Marco espresso machines. With San Marco this gasket is used on the brewing groups and level gauge. For Bezzera this gasket can be used on various steam and water valves. The Bezzera part references are 5302502, 5493013 and 5493041. For San Marco the...

This 3 way solenoid valve is one of the most commonly found solenoid valves. The part is produced by Parker in Italy. This valve is mainly used as a brewing group solenoid valve. The remaining water from the group comes out of the outlet at the top. The Parker part numbers for this item are 393107J and 393112J This solenoid valve is a 3 way valve. The...

The item on this product page is a Fluid o Tech rotary vane pump. This specific model of pump can be found on various Bezzera Espresso machines. The Bezzera part reference for this item is 7730506. This pump is a clamp on model and has a flowrate of 100 L/H. This pump is equipped with a filter and a balanced bypass. This pump has been manufactured in...

In some cases, the shower screen is attached with a screw, in most cases that is a Philips or a slotted screw. It is difficult to remove it with a regular screwdriver due to the limited height under the brew group.  But for that you need a shortened slotted screwdriver, in this case the one from the German brand Wera, which fits well under the brewing...

On this page you will find a brass brewing group plug. The outer diameter of this plug is 18mm. This plug is used to seal off the nozzle/gigleur compartment. You will find this part on a variety of brewing groups. Brands like Bezzera (5288001) Brasilia (0210600004 ) la Pavoni (313600) and wega espresso machines. If you are not entirely sure if this...

When you want to clean your portafilter at the end of the day you need to remove the filter basket from the portafilter. But these baskets are normally held in place with the internal spring and can be difficult to remove. Instead of removing the basket with a spoon IMS Filtri has made a filter basket removal tool. This tool is made from stainless...

On this product page you will find a level regulator made by the Italian company Gicar. This level regulator can be used on various Bezzera espresso machines. The Bezzera part reference of this item is 7661034.01  This level regulator has the Gicar code 9.1.24.20G. The part name is RL 30/4ESS/F and runs on 230Vac. This item can be used on models...

On this page you will find a OEM/Original Bezzera water inlet valve. This valve can be used on a variety of Bezzera espresso machines. The part reference of this item is 5964054 This water inlet valve has on the in and outlet a 3/8” BSP-G thread. This water inlet valve can be used on the Bezzera B2000, Bezzera B2006, Bezzera B2009, Bezzera B3000...

The motor on this product page is made by the Italian company RPM, this motor can be used on various Bezzera espresso machines. The Bezzera part reference number for this item is 7742202. This model of RPM motor is the C0137.80, this is a clamp on motor. So not suitable in combination with flange pumps. This model produces 120W at 230V at 50/60Hz and has...

The switch on this page is used in the Bezzera B6000 espresso machine. The Bezzera part reference for this item is 7633331. This switch has been rated up to 16A at 250V. The switch uses a mounting hole of 21x17mm. The push button itself is 17x13mm. The switch has been made in Italy.