Brasilia Part category

On this page you will find a heating element suitable for various Brasilia espresso machine models. This specific heating element is suitable for a 1 group espresso machine. The Brasilia part reference is 00614.2.00.08 This heating element produces 1800W at 230V, there are 4 connecting poles. The element has a immersed length of 170mm. The flange on this...

The rotary vane espresso machine pump. There are various brands which manufacture these pumps like Fluid o tech, Nuert and Procon. The pump on this page is made by the company Procon. Part number 132A060F123B The pump on this page is called a rotary vane clamp pump. The pump is clamped on a flange with a stainless steel clamp. If you tighten this clamp...

Ulka vibration pump damper

The item on this product page is a fitting used on various steam and water valves. You can use this fitting on Brasilia and Marzocco espresso machines. The Brasilia part references are 07202.0.00.04 and 07202.0.10.04, for Marzocco it is L053/2.  This fitting is made from brass and has been nickel plated (in some cases they are just brass). On...

On this product page you will find a universal type of heating element, can be used on a variety of espresso machine models. Such as Brasilia and ECM espresso machines. The Brasilia part reference is 00615.2.00.08 and the ECM reference is C199900513. The heating element is one which produces 3000W at 230V and has 4 connecting poles. The overall length of...

The valve axle on this page is suitable for a variety of Brasilia espresso machine models. This steam and water valve shaft has the Brasilia part reference of 12046.4.00.09 This steam and water valve shaft has a overall length of 100mm and comes with a sealing gasket already installed. You can use this valve not in combination with the ceramic valves....

To hold a coffee filterbasket in it’s place there is always a spring installed in the portafilter. In each modern portafilter is a recess machines to accommodate such a spring. You can use spring on brands such as Casadio, Carimali, San Remo, Bezzera, Cimbali, Astoria, Spaziale This spring is made from stainless steel. The cord diameter is 1,2mm....

The item on this product page is a brass fitting. This fitting has on 1 side a male thread of ¼” BSP-G and on the other side a male thread of 3/8”BSP-G.This brass fitting has been made in Italy. This type of fitting can be found with various espresso machine brands such as Astoria, Grimac, La Carimali, La Spaziale, Nuova Simonelli, La...

Brewing group spring 55mm

The portafilter gasket shown on this page can be used on various Elektra espresso machines. The Elektra part reference for this item is 01917035 and EL-G1. This filter holder gasket has an outer diameter of 67mm a inner diameter of 56,5mm and a thickness of 5,3mm. This portafilter gasket has been made in Italy. You can use this portafilter gasket...

The product on this page is a gigleur/nozzle for inside a brewing group. This type of nozzle can be used with brands from the Astoria CMA group. For Astoria the part number is 10300001 and for Wega the part number is WY10300001 This specific gigleur is made from brass and has a central hole of 0,7mm. The threads used are a M5 with a pitch of 1mm....

The o ring on this product can be used on various espresso machine brands such as San Remo, Elektra, Spaziale, Victoria Arduino and Brasilia. The part reference numbers can be found in the extra info tab on this product page. This o ring is made from EPDM. The cord diameter is 2,62mm, the internal diameter is 47,30mm. This item has been made in Italy....