Brasilia Portofino

The item on this product page is a steam and water valve elastic washer, used on various Brasilia espresso machines. The Brasilia part reference number for this item 01286.0.00.03  These washers are used in a pair in combination with the articulating valve screw, which is used on the steam and water valves. You can use these washers on the Brasilia...

The o ring on this page can be used in various applications in espresso machines. This ranges from water and steam valves, water inlet taps and water levels. The part on this page is a O ring made from the material EPDM. This o ring has a cord diameter of 2,7mm and a inner diameter of 12,1mm. This o ring is produced in Italy. You will find this o ring...

The top HX boiler fitting, a generic item you will find with a lot of espresso machine brands. This ranges from Vibiemme, Grimac, Pavoni, La Scala to Expobar, Brasilia and BFC. This specific item is a casted brass fitting. The side which is screwed into the HX is a ½”BSP-g and the side where the tube to the brewing group goes to is also a...

This brass casted boiler fitting is used on the bottom side of the heat exchanger (HX) of the espresso machine boiler. It attaches to the HX with a ½”male flat sided connection. The other ½”pipe connection is for the return pipe from the brewing group. The ¼”female thread on the bottom is for the injector tube. In this tube the fresh water is injected....

The steam tube on this page can be used on a variety of Brasilia espresso machines. The Brasilia part reference for this item is 12058.4.00.09. The steam wand has been made from chrome plated brass and copper. This steam tube is not installed with a fitting, but is held in place with a articulating nut.  On the steam nozzle tip side is a rounded...

This sight glass washer can be used on Gaggia and Brasilia water level assemblies.  This ring spreads the force equally over the sight glass gasket. The Brasilia part reference for this item is 00088.0.00.04 and the part reference for Gaggia is LV0506. This brass washer has a outer diameter of 15mm a inner diameter of 11,5mm and a thickness of...

In some cases, the shower screen is attached with a screw, in most cases that is a Philips or a slotted screw. It is difficult to remove it with a regular screwdriver due to the limited height under the brew group.  But for that you need a shortened slotted screwdriver, in this case the one from the German brand Wera, which fits well under the brewing...

The 2 coffee filterbasket on this page can be used a big variety of espresso machine brands. You can use this basket on brands such as Brasilia, Elektra, Victoria Arduino, Faema, Cimbali, Casadio, La Scala. This filterbasket has been made by the Italian company IMS Filtri. The IMS part reference is CF2T069. Note: this is not a competition...

On this page you will find a solenoid valve made by the parker company. This specific solenoid valve is a 3 way valve. The Parker part numbers for this item are 393117J and 393122J This specific 3 way valve is one of the flanged series. This flange seals off with 2 small o rings.  The valve runs on 230V at 50/60Hz, the coil used on this valve is the...

The sight glass on this page is suitable for a variety of Brasilia espresso machine models. The Brasilia part reference for this item is00787.0.00.02. This sight glass has a outer diameter of 11mm and a overall length of 135mm. On the back is a red line to make the water level more visible. On the front is a scale with the minimum and maximum level. This...