Faema Part category

The heating element on this page is one suitable for vintage Faema espresso machines. If you want to run your Faema E61 2 group on 110V this is the heating element you need. This heating element produces 2600W at 110V. There are 4 connection terminals. The immersed length of the heating element is 350mm. In the middle of flange is a spare tube for a...

This brass tap spindle is used a the Faema E61 steam and water valve and the valves which have resemblance to the e61 valve used by brands like Vibiemme, La Scala and Grimac. When the shaft axle is turned open or closed, this tap spindle pushes against the valve seat. Which opens or closes the steam/water valve. This specific brass tap spindle has a...

On this product page you will find a heating element used for a variety of espresso machines made by the La Cimbali group. This specific heating element is suitable for a 2 group espresso machine. You can use this element with various brands such as Cimbali, Faema and Casadio. This heating element produces 3780/4500W at 230/400V, the element has 6...

Do you have a crack in your original Faema E61 single group cup warmer? You can replace it with a replacement like the this model. The Faema E61 cupwarmer screen for the 1 group Faema E61 espresso machine. The item isn’t clear like the original vintage Faema E61. For the Faema E61 Legend S1 and Faema E61 Jubile A1 we have a different product...

On this page you will find a touchpanel membrane for the Faema Enova A, so not for the Enova S. This item is compatible with the Faema part reference of 915313010. This touchpanel has in total 5 buttons. 4 of these keys are for the pre-set volumetric settings. The other one is the continuous key and the programming key for the volumetric settings. Note:...

On this product page you will find a flat PTFE gasket which can be used in various applications on Faema and Casadio espresso machines. This flat PTFE gasket can be used in brewing group applications and water and steam valves. The Casadio part reference for this item is 4701116694, the Faema part reference is identical to this number. This ptfe gasket...

Faema E61 stickers

On this page you will find a steam nozzle which can be used in combination with some models of Faema, Casadio and La Cimbali. The steam tube has a female 1/8”BSP-Gt thread. On each side of the steam tip there are 2 holes, both have a diameter of 1,5mm. There are 2 flattened spots on the nozzle, so that you are able to install a spanner on it when...

Faema ariete aluminium boiler ring 16 holes 246X210X10mm

This ½” chrome plated stuffing nut has a central hole of 10,7mm. The item itself has a height of 17mm. You need a metric key 22 to install this item. This is quite a common key size in most peoples toolbox. But what is the function of this part and where can it be found. This threaded stuffing gland is used in the side of the Faema E61, Faema E61 Legend...

Every brewing group uses a portafilter gasket. In this case it is a 73x57x9mm gasket. In this case they are made from a food grade nitrile butadiene rubber(Nbr) The OD and ID of 73x57mm is quite a standard size. You will see this size with brands like Expobar, Vibiemme (VBM), La Scala, Bezzera, Faema and Azkoyen. This doesn’t mean that these brands don’t...

On this product page you will find a manometer which is suitable for a variety of Faema E61 espresso machine models. The part reference for this boiler manometer is 3781135802  This boiler pressure gauge has a shiny chrome rim with a outer diameter of 71mm, the body itself is 52mm. The scale on this manometer goes from 0 to 3 bar. The fitting on the...