Filter by
Categories
Price
Manufacturers
Filter

Home

Astoria/Wega pressure switch 1,5 bar 1/8"

The pressure switch on this product page is used on various Astoria and Wega espresso machines. This OEM/Original spare part has the Astoria part reference number 20158 and the Wega part reference number WY20158. This pressure switch is the ES31. It has been pre-set at 1,5bar. The fitting on the bottom is a 1/8” male thread. It is fitted with a EPDM seal....
€57.51
Quick-view

Vibiemme touchpanel flat cable 8 pole 800mm

The cable on this product page is a connecting cable for various Vibiemme espresso machines. You use this cable between the dosing device and the touch panel.  The Gicar part reference number is 8.9.18.57G and the Vibiemme part reference number is ELETCAV8V800 The connector is a 8 pin connector and the length of the cable is 800mm. This item is made in...
€14.65
Quick-view

Rancilio Classe 5 Asco pressure switch P302/6

The pressure switch on this page is specifically used on the Rancilio Classe 5 espresso machines.  This specific model of pressure switch is made by the Italian company Asco/Sirai and it is the model P302/6. The Rancilio part reference number for this pressure switch is 34200356. This pressure switch has CE and UL approval. It has a adjustable pressure...
€155.69
Quick-view

San Remo Treviso LX bottom plate original

The item on this product page is a bottom plate for a San Remo Treviso LX. This OEM/Original San Remo spare part has the part reference number 10024192A and 10024192C. This item has been made in Italy.
€38.34
Quick-view

Vibiemme Domobar Digitale temperature probe original

The temperature probe on this product page is  OEM/original Vibiemme spare part. This temperature probe is used on the Vibiemme Domobar Digitale. The probe has a male thread which is a ¼” BSP-G. The bulb has a diameter of 3,3 mm and a length of 24mm. The cable length is 450mm.
€87.12
Quick-view

Gaggia/Saeco gasket holder

The item on this page is a OEM/original Gaggia/Saeco spare part spare part. It is a gasket holder, which is used in combination with the lip seal. To seal off the connection to the water tank. The Gaggia part reference number 0701.014.150. The Saeco part reference numbers are 0701.014.150 and 149185359. This gasket holder is made from black plastic and is...
€3.74
Quick-view

Mazzer coffee hopper Major / Robur / Royal damaged 01

This hopper does have a small scuff from shipping and the attachment screw at the back is missing. But in a solid condition. The coffee hopper on this page is a OEM/Original Mazzer coffee grinder spare part. This hopper can be used on the Electronic models as well as on the Doser models. The item has the Mazzer part references of S000CAE03, S00SCAE03 and...
€40.64
Quick-view

Nuova Simonelli Oscar II electronic board 230V

The item on this product page is a electronic board for the Nuova Simonelli Oscar II. This board is a OEM/Original Nuova Simonelli Spare part. The part reference number is 04901094. This unit is 120x66mm and is supplied with 230V. so not suitable for the 110-115V models. This unit is made in Italy.
€205.69
Quick-view

Nuova Simonelli drain manifold

The item on this product page is a drain manifold for various commercial and domestic Nuova Simonelli espresso machines. This item is a OEM/original Nuova Simonelli spare part and has the part reference number 05002228 This drain manifold can be used on the Nuova Simonelli Appia, Nuova Simonelli Appia II, Nuova Simonelli Aurelia, Nuova Simonelli Musca,...
€7.78
Quick-view

Nuova Simonelli water inlet solenoid valve 220/240V

The item on this product page is a single way solenoid valve, which is a OEM/original Nuova Simonelli spare part. This solenoid valve is used on various Commercial and domestic espresso machine models of Nuova Simonelli. The Nuova Simonelli part reference number is 04100060. This solenoid valve is the main water inlet valve for various models. It is a...
€38.34
Quick-view

Cimbali/Faema non return valve spring 6,5x20mm

The item on this product page is a non return valve spring. This valve spring is used on various La Cimbali and Faema water inlet valves. The Cimbali part references for this item are 4731027556 and 4731-027-556. For Faema the part reference number is 4731027556.  This non return valve spring is made from stainless steel. The outer diameter is 6,5mm and...
€1.54
Quick-view

La Spaziale infuser spring holder bushing

This item is a spring holder bushing used on various La Spaziale brewing groups. This item is a OEM/original La Spaziale spare part and has the part reference number 00365. This brass bushing has a outer diameter of 32mm and a internal diameter of 15mm. The height is on the outside rim 4mm and the inside it is 8mm. You can use this item on various,...
€13.09
Quick-view

Isomac Venus portafilter gasket 73x57x8mm original

The item on this product page is a OEM/Original Isomac spare part. This portafilter holder gasket can be used on the model Isomac Venus. Note: only on machines produced from 2011. The Isomac part reference number for this item is IS351030. To make sure you have the correct item, measure your original portafilter gasket to be sure. This portafilter gasket...
€9.20
Quick-view

Nuova Simonelli old model side steam tube

The item on this product page is a Nuova Simonelli steam tube. The steam tube is a OEM/original spare part and has the part references 75006010 and 75006035. This steam tube is used on the steam valves with a side connection and can’t be used on the standard swivel joint steam valves. This steam tube can be used on various Nuova Simonelli models such as...
€65.91
Quick-view

Nuova Simonelli stainless grub screw M6x6

The item on this product page is a stainless steel grub screw, which is used on various domestic Nuova Simonelli espresso machines. The Nuova Simonelli part reference number for this item is 00300040 This grub screw is used in the back of the brewing group. The screw has a M6 thread and a length of 6mm. The item is made in Italy. It is used on various...
€0.98
Quick-view

Red bipolar switch 16A 250V

The item on this page is a red bipolar switch which can be used on various Fiorenzato espresso machines. The Fiorenzato part reference number for this item is A2100043. This switch is a bipolar model, it is rated up to 16A at 240V. The maximum operating temperature is 105 degree C. The mounting hole of this switch is 13x20mm. You can use this switch on...
€11.53
Quick-view

Motta Europa milk jug 0,35L black

The milk jug on this page is made by the Italian brand Motta Metallurgica, this comes from the Europa series. Only this version is not in a polished stainless but has been finished with . This milk pitcher is the 0,35L model. It is made from stainless steel 18/10, also called stainless steel 304. Which is a food grade stainless steel. This item has been...
€53.39
Quick-view

Eureka Mignon coffee knock box

To keep your work top well organized it is handy to leave your coffee residues somewhere. The Eureka coffee grinder brand has found a solution for that, if you have a Mignon coffee grinder. A worktop knock box, which doesn’t take more space seen your Mignon coffee grinder is placed on top of it. This knock box is made by the Italian company Eureka....
€256.67
Quick-view

Rold microswitch 12A 250V

The item on this product page is a small microswitch with can be used on various espresso machines and coffee grinders. Such as on espresso machines made by Isomac and Quick Mill and coffee grinders made by Anfim. The Anfim part references are 260 or 500260 and for Isomac the reference is IS000770 This microswitch is made by the Italian company Rold. This...
€11.38
Quick-view

Rancilio Rocky portafilter holder fork

The portafilter fork on this product page is solely suitable for the on demand version of the Rancilio Rocky coffee grinder, the Rancilio Rocky. The Rancilio part reference number for this item is 23000001. The item itself is a OEM/original Rancilio spare part and has been made in Italy
€38.49
Quick-view

Rancilio Rocky coffee hopper

The item on this page is the iconic Rancilio Rocky blue hopper, which holds the coffee beans before grinding. This item is a OEM/original Rancilio spare part with the part reference number 38123029A. The hopper itself is solely the hopper, so it doesn’t come with the insert (38123040) nor the hopper lid 38123033 You can use this hopper on the Rancilio...
€54.19
Quick-view

Rancilio Rocky on demand coffee outlet

You can only find this item on the on demand version of the Rocky coffee grinder. This item is a coffee chute. This chute transports the ground coffee from the grinding burrs out of the machine into the portafilter. This coffee outlet has been made from the blue clear plastic where also the hopper is made from. This item has the Rancilio part reference...
€57.73
Quick-view