La Cimbali M24 - Brewing group

Every brewing group uses a portafilter gasket. In this case it is a 73x57x9mm gasket. In this case they are made from a food grade nitrile butadiene rubber(Nbr) The OD and ID of 73x57mm is quite a standard size. You will see this size with brands like Expobar, Vibiemme (VBM), La Scala, Bezzera, Faema and Azkoyen. This doesn’t mean that these brands don’t...

The product on this page is a solenoid valve connector, large F fitting. With this connector you can seal off and connect your wiring and solenoid valve to each other. These connectors can be used on all types of standard solenoid valve coils. Where the positive and negative are spaced apart approx. 17mm. This solenoid valve connector can be basically...

The o ring on this page is a green Viton o ring used in the most commonly used La Cimbali Brewing group. This gasket makes on multiple locations a seal between the 150mm/210mm HX tube and the brewing group head and the HX and the boiler flange. There are multiple Cimbali part numbers such as 401178002, 401-178-002, 401178012 and 401-178-012. This o ring...

This o ring is one of the most common parts in the world of espresso machines. The main function of this o ring is to seal off a flanged solenoid valve. Every flanged solenoid valve uses 2 of these. But you will also find them in applications like steam and water valves and water inlet taps. The o ring has a wire diameter of 1,78mm and a internal...

The nozzle/gigleur is used on a couple of Cimbali brewing groups. This nozzle is not located inside the brewing group, as you see with most gigleurs. But it is installed inside the tubing at the flowmeter or close to the brewing group. This item has multiple part numbers you will find those at the extra info tab. This gigleur has a outer diameter of 14mm...

The solenoid valve on this page is a 3 way solenoid valve, mainly with the application as a brewing group solenoid valve.  Parker has listed this part under 471012 and 471013 The coil used on this solenoid valve is a 9W 220/240V which runs on 50/60Hz. The coil number for this solenoid valve is 483510S6 The valve in question is a 3 way solenoid...

The conical portafilter gasket on this page is suitable for a variety of espresso machine brewing groups. Such as the ones for Casadio, Cimbali, Nuova Simonelli and Victoria Arduino. The matching part numbers for it are Casadio 401261010, Cimbali 401-261-010, Nuova Simonelli 40200004 and Victoria Arduino 40200004. This portafilter gasket has a conical...

On this product page you will find a paper seal for a portafilter gasket. This model of paper shim can be used on a variety of brands of espresso machines such as Casadio, Cimbali, Astoria, Nuova Simonelli, Wega and Brasilia. What does a paper shim do? The brewing group ring and portafilter ears wear down over time, to compensate this there are paper...