La Cimbali M24 - Brewing group

The hex screw on this page is used on various La Cimbali espresso machine brewing groups. The part reference number for this item are 593815000 and 593815010  This head bolt keeps the portafilter coupling ring in place. The thread used on this nut is a male M6. The length of this screw is 29mm, the item has been made in Italy. Note: there are various...

The double portafilter on this product page is suitable for a variety of La Cimbali espresso machines. This 2 coffee portafilter is use on more modern La Cimbali espresso machines. This portafilter is a 2 coffee model. The coffee spout has a 3/8” BSP-G thread and is completely covered. The thickness of the ears is 5,5mm and are oriented at 90 degrees....

The gasket on this page can be used on a variety of espresso machines such as Cimbali, Nuova Simonelli and Victoria Arduino. This specific gasket is made by the company Cafelat in HongKong. The gasket is made from food graded silicone, which has a blue colour. The outer diameter of this gasket is 71mm, the inner diameter is 56,5mm and the thickness is...

Every brewing group uses a portafilter gasket. In this case it is a 73x57x9mm gasket. In this case they are made from a food grade nitrile butadiene rubber(Nbr) The OD and ID of 73x57mm is quite a standard size. You will see this size with brands like Expobar, Vibiemme (VBM), La Scala, Bezzera, Faema and Azkoyen. This doesn’t mean that these brands don’t...

The conical portafilter gasket on this page is suitable for a variety of espresso machine brewing groups. Such as the ones for Casadio, Cimbali, Nuova Simonelli and Victoria Arduino. The matching part numbers for it are Casadio 401261010, Cimbali 401-261-010, Nuova Simonelli 40200004 and Victoria Arduino 40200004. This portafilter gasket has a conical...

The solenoid valve on this page is slightly different then the flanged 3 way solenoid valve. Instead of the traditional brass solenoid valve flange is this one made from stainless steel. This parker 3 way solenoid valve is mainly used as a brewing group solenoid valve. The Parker part number for this item is 3019F1GRG7XS03XS6 and 131FSG100 As mentioned...

The single coffee stainless steel filterbasket on this page can be used with a variety of La Cimbali espresso machines. This item has been made in Italy by IMS filtri with the part reference GC1T044 The 1 cup coffee filter basket has a outer edge diameter of 68mm and a height of 22,5mm. The hole pattern is located in a diameter of 30mm.  The filter...

The o ring on this page is a green Viton o ring used in the most commonly used La Cimbali Brewing group. This gasket makes on multiple locations a seal between the 150mm/210mm HX tube and the brewing group head and the HX and the boiler flange. There are multiple Cimbali part numbers such as 401178002, 401-178-002, 401178012 and 401-178-012. This o ring...

This 3 way solenoid valve is one of the most commonly found solenoid valves. The part is produced by Parker in Italy. This valve is mainly used as a brewing group solenoid valve. The remaining water from the group comes out of the outlet at the top. The Parker part numbers for this item are 393107J and 393112J This solenoid valve is a 3 way valve. The...

This heat exchanger support ring is used on La Cimbali brewing groups with the heat exchanger. This ring slides over the heat exchange itself and supports the copper heat exchanger. This ring is suitable in combination with the 210mm heat exchanger and the 150mm heat exchanger. The Cimbali part number used for this item is 457-165-028 This heat exchanger...

On  this page you will find a 3 way solenoid valve made by the company Parker. This specific model is a 24V AC 3 way valve. Which can be used on some Faema and San Marco brewing groups. The parker part number for this item is 393110J This solenoid valve is a flanged 3 way valve. The flange is sealed off with the 2 o rings at the bottom of the valve....

This o ring is one of the most common parts in the world of espresso machines. The main function of this o ring is to seal off a flanged solenoid valve. Every flanged solenoid valve uses 2 of these. But you will also find them in applications like steam and water valves and water inlet taps. The o ring has a wire diameter of 1,78mm and a internal...