La Cimbali M31 Dosatron

The steam and water valve on this page is used on most La Cimbali espresso machines. But you can find this model as well on Casadio and Faema espresso machines. For the part references check the extra info tab on the side. This complete steam and water valve has been casted out of brass and machined afterwards. The valve has 2 connections. For the steam...

On this page you will find a o-ring which can be used for various applications. This ranges from brewing groups, water level to steam and water valves This specific O ring has been made out of EPDM. The cord diameter of this ring is 1,78mm and the internal diameter is 9,25mm. This o ring can be used with steam and water valve applications like Rancilio...

The solenoid valve on this page is a 3 way solenoid valve, mainly with the application as a brewing group solenoid valve.  Parker has listed this part under 471012 and 471013 The coil used on this solenoid valve is a 9W 220/240V which runs on 50/60Hz. The coil number for this solenoid valve is 483510S6 The valve in question is a 3 way solenoid...

This o ring is one of the most common parts in the world of espresso machines. The main function of this o ring is to seal off a flanged solenoid valve. Every flanged solenoid valve uses 2 of these. But you will also find them in applications like steam and water valves and water inlet taps. The o ring has a wire diameter of 1,78mm and a internal...

On this page you will find a heat exchanger cartridge. This tube is available in 2 versions a 210mm version and a 150mm version. The one on this page is a 210mm version. The length of this copper heat exchanger is 210mm and has a outer diameter of 42mm. It is possible that you get a blank copper one or a copper with nickel plating. This cartridge can...

The portafilter gasket on this page is a silicone La Cimbali conical portafilter gasket. This portafilter gasket has the Cimbali part number 401-261-010 . This portafilter gasket can also be used for the Casadio Venti (401261010) and the Faema E98 Compact (401261010) This portafilter gasket has a outer diameter of 71mm a internal diameter of 56mm...

In some cases, the shower screen is attached with a screw, in most cases that is a Philips or a slotted screw. It is difficult to remove it with a regular screwdriver due to the limited height under the brew group.  But for that you need a shortened slotted screwdriver, in this case the one from the German brand Wera, which fits well under the brewing...