La Cimbali M31 Dosatron

The heating element gasket on this page can be used in a variety of espresso machine models made by Casadio and Cimbali. The Casadio part number is 401194010 and the Cimbali part number is 401-194-000. This gasket has been made from AFM34 by Victor Reinz. This gasket has a outer diameter of 58mm a inner diameter of 50 mm and a thickness of 2mm. The gasket...

The gasket on this page is used on various water inlet valves with the brand La Cimbali. The Cimbali part reference number for this item is 401281000 and 401-281-000. The flat gasket has been made from PTFE. The outer diameter is 11,4mm the inner diameter is 8mm and the thickness is 3mm. this gasket has been made in Italy. You can use this gasket...

The o ring on this page is a red Silicone o ring used in the most commonly used La Cimbali Brewing group. This gasket makes on multiple locations a seal between the 150mm/210mm HX tube and the brewing group head and the HX and the boiler flange. There are multiple Cimbali part numbers such as 401178002, 401-178-002, 401178012 and 401-178-012....

On this page you will find a shower screen holder suitable for the Casadio Venti groups and most of the La Cimbali brewing groups. For the Casadio machines you will find it under the part number 457037048 and for Cimbali espresso machines with part number 457-037-048  This brass shower holder has a outer diameter of 35mm and 6 smaller holes for...

The copper tube on this product page is used with various Faema and Cimbali espresso machine models. The Cimbali part references for this item are Cimbali 421580020, Cimbali 421-580-020, Cimbali 947-557-000F and 947-557-020F. For Faema the part reference is 421580020. This copper tube is used as a brewing group out let tube. A section of this tube...

The shower screen on this page is one of the most commonly used screw in showers. The manufacturer of this shower screen is IMS Filtri, the part number of this item is IMSDR310. IMS filtri doesn’t only make competition shower screen but just also regular screens. This shower screen has a diameter of 51,5mm. the central hole is suitable for a m5 screw. The...

This o ring is one of the most common parts in the world of espresso machines. The main function of this o ring is to seal off a flanged solenoid valve. Every flanged solenoid valve uses 2 of these. But you will also find them in applications like steam and water valves and water inlet taps. The o ring has a wire diameter of 1,78mm and a internal...

On this product page you will find a anti vacuum valve. This valve is made completely out of brass and can be easily disassembled. This type of anti vacuum valve is used with quite a lot of espresso machine brands. This valve has a male ¼”BSP-G thread. The o ring inside the valve is made from HNBR, but the o ring end stop is made from PTFE. As mentioned...

The diaphragm on this product page can be used in pressure switches mainly used in La Cimbali Models, but you can also find it in a Faema espresso machine. The Cimbali part references for this item are 468007020 and 468-007-020. For Faema the part reference is 468-007-020. This diaphragm is used in the Cimbali pressure switch 537-030-700. Over time...

The gasket on this page can be used on a variety of espresso machines such as Cimbali, Nuova Simonelli and Victoria Arduino. This specific gasket is made by the company Cafelat in HongKong. The gasket is made from food graded silicone, which has a blue colour. The outer diameter of this gasket is 71mm, the inner diameter is 56,5mm and the thickness is...

The shower screen on this page is made by the Italian company IMS Filtri, no this is not a competition shower. But they also make standard shower screens. This shower screen can be used on a variety of brewing groups. Like on the ones of Reneka, Carimali, Bezzera, Grimac, Astoria, Wega and Elektra. The external diameter of this shower screen is 51,5mm...

In some cases, the shower screen is attached with a screw, in most cases that is a Philips or a slotted screw. It is difficult to remove it with a regular screwdriver due to the limited height under the brew group.  But for that you need a shortened slotted screwdriver, in this case the one from the German brand Wera, which fits well under the brewing...