Filter by
Type part

La Cimbali M39 - Hydraulics

The hydraulic components on the La Cimbali M39 espresso machines are quite a broad spectrum of parts. This does depend on if it is a La Cimbali M39 Classic or a Cimbali M39 Dosatron.

On the La Cimbali M39 Dosatron you have hydraulic components like the over pressure valve, flowmeters and the pressure switch. On the La Cimbali M39 Dosatron this is on the earlier models a mechanical single phase switch and on the later models it became a pressure sensor. The Cimbali M39 Dosatron versions can also be fitted with the Cimbali Thermodrive system, this is not standard on every espresso machine.

The La Cimbali M39 Classic espresso machine does have the over pressure valve, but it doesn’t have the flowmeters seen it is not a volumetric espresso machine. It is also not fitted with a digital pressure sensor like the Dosatron, but with a mechanical pressure switch like the Asco P302.

If you are not sure if you can find the correct hydraulic parts for your La CimbalI M39 Espresso machine. Don’t hesitate to contact us.

La Cimbali M39 Hydraulics espresso machine parts

La Cimbali drain pan with 3/4" fitting

This item is a drain tank which is used on a variety of La Cimbali espresso machines.  The La Cimbali part reference numbers for this item are 422025020  and 422-025-020.  This drain tank is installed in the espresso machine with 2 screws, one on each side. The main drain fitting is a male ¾”. This drain tank is normally used in combination with a 1500mm...
Casadio/Cimbali/Faema drain...
  • New

Casadio/Cimbali/Faema drain tank

The drain tank on this page can be used on various espresso machines of Gruppo Cimbali. So you can use it on various models of Casadio, Cimbali and Faema. This part has the Casadio part reference number 958958020, the Cimbali reference 958-958-020 and the  Faema reference of 959775010. This drain tank is used to collect the drain water from the various...

La Cimbali M39 boiler manometer 0 - 2.5 bar

You can find on this product page a small boiler pressure manometer. This model has been used in various La Cimbali and Faema espresso machines.  The Cimbali part reference for this item is 3781-133-400 and for Faema 3781133400. There are more product references for this item, you can find those in the extra info tab. This pressure gauge is used for...

La Cimbali pump manometer 0 - 16 Bar

On this page you will find a small pump manometer, one of the smaller models. This model you mainly see used with the La Cimbali group. The la Cimbali part number for this item is 3781-133-399 and Faema part number is 3781133401  This manometer is a pump manometer with a pressure range of 0 – 16 bar. The rim diameter of this pressure gauge is...

Cimbali/Faema air regulator valve

This air regulator valve can be found on a variety of espresso and automatic coffee machines of Gruppo Cimbali. This item is used on traditional models such as the M100, M39 Faema Emblema and the stylema. But also on a variety of super automatic coffee machines such as the Cimbali M1, M2, M51 and Faema models such as the X1, X3 and the X30. The in and...

Gicar flowmeter 1/4"FF nozzle 1,0mm

On this product page you will find a flowmeter suitable for various brands of the La Cimbali Group. This flowmeter has been manufactured by the Italian company Gicar. The part references of Gicar for this item are and This flowmeter is made out of 2 pieces. The brass, low lead, casting and the measuring device which is made from a...

Lucifer solenoid valve 2 way 1/8" 1/8" 24V AC 9W

The solenoid valve on this product page is one made by the company Lucifer. The coil states Parker, this is the main company. This solenoid valve is used in various La Cimbali and Faema espresso machines. This solenoid valve is a 2 way valve. The coil used is a 9W 24V model. The hole diameter is 2,5mm and is sealed off with a FKM seal. The maximum...