San Marco 95 Practical - Sprint brewing group

The shower holder diffuser on this page is used on various La San Marco espresso machines. The San Marco part references for this item are 205405 and CCMMIN2140  The shower diffuser plate on this page has a outer diameter of 54mm and a height of 12mm. The central hole is 5,5mm. The shower screen holder can be used on various La San Marco...

On this page you will find a portafilter which is suitable for various San Marco espresso machine models. The model used by San Marco is unique in it’s own way with the 3 ears and the classical rounded off handle. The San Marco part reference for this item is 1165080 The portafilter has 3 ears, These ears have a thickness of 7,4mm. This specific...

The solenoid valve on this page is a 3 way solenoid valve, mainly with the application as a brewing group solenoid valve.  Parker has listed this part under 471012 and 471013 The coil used on this solenoid valve is a 9W 220/240V which runs on 50/60Hz. The coil number for this solenoid valve is 483510S6 The valve in question is a 3 way solenoid...

The gasket on this page is a group locking gasket used on various La San Marco espresso machine models. The La San Marco part reference for this item is 109070  This gasket is made from a fibre material. The length of the gasket is 95mm and the width is 45mm. there are 2 holes for threads and one for a supply tube. This gasket has been made in Italy...

The portafilter gasket on this page is a OEM/Original San Marco spare part. The part reference for this item is 109130  The gasket has been made form NBR. The outer diameter is 64mm, the inner diameter is 52,5mm and the thickness is 5,5mm. The gasket has on the outside external cuts. This gasket has been made in Italy. You can use this gasket on San Marco...

This item is a conical PTFE gasket. This gasket is used with various brewing groups of La San Marco. The part references for this item are 106151 and CMPTOR0020. This conical gasket has been made from PTFE. The outer diameter of this gasket is 10mm. the inner diameter is 4mm and the thickness is 6mm. This gasket has been made in Italy.  This...

The portafilter gasket shown on this page can be used on a variety of San Marco espresso machine brewing groups. But the traditional gaskets are made from NBR, but this model has been made from food graded Silicone. The Rancilio part reference for this model of portafilter gasket is 109011 and 109130  This blue silicone portafilter gasket has a...

The filterbasket shown on this product page is a 2 coffee filterbasket suitable solely for La San Marco espresso machines. The part reference for this item is 202118 and CCMFIL0110. This filter basket has been made by the Italian company IMS Filtri. The part reference for this basket from IMS is SM2T122. Note: this is not a competition basket. This...

The 2 coffee filter basket on this product page is a precision/competition model made by the Italian company IMS Filtri. This model is called the B662TH26M and is mainly used on La San Marco espresso machines but can also be used on Dalla Corte espresso machines. This filter basket is made from stainless steel, it can hold between 14 and 18 grams of...

One off the companies who use their own size of filter baskets is La San Marco. On this page you will find the IMS Filtri competition filter basket for a single dose. For this item IMS uses the product code B661TH25M. As mentioned before, this is a single filter basket for 1 coffee. The basket can hold about 7 to 8 grams of ground coffee. The basket...

On this product page you will find a bigger double filterbasket which can be used for all La San Marco espresso machines. The La San Marco part reference for this item is 1460109 . This filterbasket is not just a double filterbasket. It is one of the competition series of IMS filtri. The part reference from IMS is B662TH32M. This stainless steel...

In some cases, the shower screen is attached with a screw, in most cases that is a Philips or a slotted screw. It is difficult to remove it with a regular screwdriver due to the limited height under the brew group.  But for that you need a shortened slotted screwdriver, in this case the one from the German brand Wera, which fits well under the brewing...