Vibiemme Dosaplus

Some heating elements have a triangular flange, these are used for some models of Vibiemme, Brasilia and Aurora Brugnetti. This heating element gasket is made from the fibre material AFM34 by Victor Reinz in Germany. This specific element has the outer dimensions of 80x80mm and a thickness of 2mm and is made from a fibre material. If you are not sure if...

The dosing device on this page can be used on various Vibiemme espresso machines. The Vibiemme part reference for this item Is ELETDOS3D2GSI. This device has been made by the Italian company Gicar, their part reference is 9.5.14.67G01 and 9.5.14.67V01. This unit is suitable for max 2 group espresso machines. The name of this model is 3D-2GRC-SILVER. It...

On the top of a Faema E61 brewing group or a E61 brewing group is always the final item. That’s a chrome plated 3/8” male plug. Nothing else nor something special. This is generic part which can also be used in a variety of situations then a E61 brewing group, but also on different locations on a espresso machine. Like on the boiler with a...

The most common location for this to seal off the 3/8” male nut on the top of the Faema E61 and E61 style brewing groups like with Bezzera, Brasilia, Grimac, La Scala, Vibiemme and Wega.But also as a gasket to seal off boiler components with brands like Vibiemme and Grimac, This gasket has been made from the material AFM 34 made by the german company...

The 2 coffee filterbasket on this page can be used a big variety of espresso machine brands. You can use this basket on brands such as Brasilia, Elektra, Victoria Arduino, Faema, Cimbali, Casadio, La Scala. This filterbasket has been made by the Italian company IMS Filtri. The IMS part reference is CF2T069. Note: this is not a competition...

This article is one of the earliest designs of the 60mm shower screen. This shower screen is made by IMS CFDR070.  The border diameter is 60mm, it has a internal height of 15,7mm. The internal holes, 112 in total, have a diameter of 2mm Note: this is not a specialty coffee shower, but IMS also produces normal showers. This is, unlike other 60mm models, a...

The item on this product page is a Vibiemme water inlet valve body. The Vibiemme part reference number for this item is RACCCOVANORIT. This item is a machined brass casting. There are no gasket holders nor springs inside this valve body. This item has been made in Italy. You can use this valve body on the Vibiemme Cubo, Vibiemme Dosaplus, Vibiemme...

The portafilter on this product page is a 1 coffee portafilter which can be used on a variety of Vibiemme brewing groups. This is the case for the commercial and the domestic espresso machine models. This portafilter has a single open spout. The ear orientation is 90 degree and the thickness of the ears is 5,5mm. The portafilter comes with a stainless...

This brass tap spindle is used a the Faema E61 steam and water valve and the valves which have resemblance to the e61 valve used by brands like Vibiemme, La Scala and Grimac. When the shaft axle is turned open or closed, this tap spindle pushes against the valve seat. Which opens or closes the steam/water valve. This specific brass tap spindle has a...

The flowmeter on this page is one of the most commonly used flowmeters in espresso machines. This flowmeter has been manufactured by the Italian company Gicar, so also made in Italy. In the extra field tab next to this text you will see a entire list of compatibilities with other models and brands. This specific flowmeter does not come with a fixed wire,...

The valve gasket on this page can be used on numerous of espresso machine brands such as Vibiemme, Wega, La Scala, Faema, La Pavoni, Brasilia and Grimac. This gasket in mainly used in the steam and water valves as well as in the water inlet valves. But the best example is in the E61(type) of brewing groups. The part reference list can be found in the...

The steam valve on this page is suitable for the Vibiemme Dosaplus and the Vibiemme Mercury. This valve has the Vibiemme part reference of RACCRUBVAMER . This steam valve is supplied with the matching steam tube. But without the steam valve knob. The original style of steam valve knob is not in production anymore.