The item on this product page is a PTFE gasket. This gasket is in use in various applications such as brewing groups, steam and water valves and water inlet valves. You can use this gasket with brands such as Carimali, Vibiemme, Scala, Grimac, Astoria, Pavoni, Wega and Victoria Arduino This gasket has been made from the material PTFE. The outer diameter...
On this page you will find a brass steam pipe bushing. But what is a pipe bushing. A pipe bushing makes it possible to move the steam and water wand freely without leaking. So how does it work? Well the pipe bushing has on the valve side 2 o rings, these seal against the side of the inside of the valve. But on the top ring of the pipe bushing there is...
On this page you will find the o ring with the cord diameter of 1,9mm and a internal diameter of 7,2mm. This specific o ring is used with a variety of applications in expresso machines. For instance, with Expobar in the water inlet valve. For Faema in the cappuccinatore. With Vibiemme, La Scala, Fiamma, Grimac, Brasilia, ECM Heidelberg and La Carimali in...
The valve gasket on this page can be used on numerous of espresso machine brands such as Vibiemme, Wega, La Scala, Faema, La Pavoni, Brasilia and Grimac. This gasket in mainly used in the steam and water valves as well as in the water inlet valves. But the best example is in the E61(type) of brewing groups. The part reference list can be found in the...
This gasket is again such a standard type of gasket in the world of espresso coffee machines. It is the EPDM gasket 15.5x7.5x4mm. This gasket is used a variety of applications on espresso machines. Offcourse on the Faema E61 brewing group as well for the E61 style brewing group, as the camme shaft gasket. By brands like Isomac, Bezzera, ECM, Brasilia,...
This brass nut has a female thread of 3/8” bsp and a height of 6mm. The outer size is 21 or 24mm, this can vary sometimes and can’t be selected. So where is this brass hex nut used in espresso machines? You can find this model hex nut mainly on water and steam taps of brands like, Royal, La Spaziale, La Scala, Nuova Simonelli, Victoria...
Every valve needs to have return spring to close again. On this page you will find the return spring used in the Faema E61 steam and water valve. As well in their successors used in Vibiemme, Grimac and la Scala machines. This spring is made out of stainless steel and has an external diameter of 12,5mm and a length of 30mm. So, steam and water valves...
The drain valve is responsible for draining the last water out of the E61 style brewing group. This espresso machine part is made up out of 4 parts. The gasket holder, the gasket, small brass washer and a triangular valve rod. The total length of this part is 27mm. This drain valve used in a variety of espresso machine brands like: Expobar CTAV1-05,...
The compression spring on this product page is used in various steam and water valves. Brands which used this model of compression spring where ECM Heidelberg, Vibiemme and La Scala. The part references are for Vibiemme MOLLTUVA, MOLTUVA and MOLTUVARUBEVO. For ECM Heidelberg the part reference number is P6003.13 This stainless steel...
The PTFE gasket on this product page is used with various brands in various steam and water valves. You can find this gasket with brands such as Vibiemme, La Scala, Fiorenzato and Brasilia. The Brasilia part reference is 01405.0.00.02, the Fiorenzato reference is A1200044 and for Vibiemme the reference is GUARTEF. This gasket has been made from...
The steam valve on this page is suitable for the Vibiemme Dosaplus and the Vibiemme Mercury. This valve has the Vibiemme part reference of RACCRUBVAMER . This steam valve is supplied with the matching steam tube. But without the steam valve knob. The original style of steam valve knob is not in production anymore.
The item on this product page is a water tube which can be used on various Vibiemme espresso machines. The Vibiemme part reference for this item is TUBIACSF and TUBIVALF. This water tube comes as a complete set and is ready to install, so including the o rings. This item has been made in Italy. This water tube can be used on the Vibiemme Chimaera,...
Cookie | Provider | Purpose | Expiry |
---|---|---|---|
PHP_SESSID | brooks-parts.com | The PHPSESSID cookie is native to PHP and allows websites to store serialised status data. On the website it is used to establish a user session and to pass state data through a temporary cookie, which is commonly known as a session cookie. These Cookies will only remain on your computer until you close your browser. | Session |
PrestaShop-# | brooks-parts.com | This is a cookie used by Prestashop to store information and keep the user's session open. It stores information such as currency, language, customer ID, among other data necessary for the proper functioning of the shop. | 480 hours |