Vibiemme Minimax boiler parts

On this page you will find a boiler contact thermostat. This boiler contact thermostat is suitable for a variety of brands like Bezzera, la Marzocco and Vibiemme. But what does a boiler contact thermostat do. Well a contact thermostat is fitted against the object with it’s metal bottom side. When the temperature off a boiler becomes above the 130...

This brass casted boiler fitting is used on the bottom side of the heat exchanger (HX) of the espresso machine boiler. It attaches to the HX with a ½”male flat sided connection. The other ½”pipe connection is for the return pipe from the brewing group. The ¼”female thread on the bottom is for the injector tube. In this tube the fresh water is injected....

The top HX boiler fitting, a generic item you will find with a lot of espresso machine brands. This ranges from Vibiemme, Grimac, Pavoni, La Scala to Expobar, Brasilia and BFC. This specific item is a casted brass fitting. The side which is screwed into the HX is a ½”BSP-g and the side where the tube to the brewing group goes to is also a...

Every espresso machine boiler needs to have their Safety valve changed with fixed intervals to be sure that when the pressure switch/thermostat fails the pressure doesn’t gets too high. So on this page you will be able to find a safety valve, the biggest size used on espresso machines, the ½”BSP. This valve is calibrated from the...

The item on this page is a brass elbow fitting. This fitting can be used on various espresso machine brands such as Faema and Vibiemme. The Vibiemme part reference for this item is RACCP429. This elbow fitting has on both sides a ¼” BSP-G thread. But on 1 side it has a flared connection instead of a conical connection. This item has been...

Some heating elements have a triangular flange, these are used for some models of Vibiemme, Brasilia and Aurora Brugnetti. This heating element gasket is made from the fibre material AFM34 by Victor Reinz in Germany. This specific element has the outer dimensions of 80x80mm and a thickness of 2mm and is made from a fibre material. If you are not sure if...

A Anti vacuum valve is used to prevent that the pressure switch is kicked in too early when heating up. This anti vacuum valve has a male screw thread of ¼” BSP. A anti vacuum valve exists out of multiple components. The body with the threads, in this case made from stainless steel. The plunger, made from brass. This plunger has also the...

On this product page you will find a heating element suitable for various Vibiemme espresso machines. The Vibiemme part reference of this item is ELETRES2G2722. This heating element is suitable for a 2 group Vibiemme espresso machine. The element produces 2700W at 230V, there are 4 connecting poles. The immersed length of this element is 250mm. The...