Vibiemme Replica boiler parts

On this page you will find a fibre gasket with a outer dimension of 41mm a inner one of 33mm and height of 3mm. This fibre gasket is used for a heating element with a flange diameter of 1”. This specific heating element gasket is used for Bezzera(5492004) espresso machines with the models: Bezzera BZ35, Bezzera BZ40, Bezzera Galatea Domus and the Bezzera...

On this page you will find a boiler contact thermostat. This boiler contact thermostat is suitable for a variety of brands like Bezzera, la Marzocco and Vibiemme. But what does a boiler contact thermostat do. Well a contact thermostat is fitted against the object with it’s metal bottom side. When the temperature off a boiler becomes above the 130...

The gasket shown on this product page can be used on various Vibiemme espresso machine boilers. The Vibiemme part reference for this item is GUARFL205T  This boiler gasket has a outer diameter of 165mm a inner diameter of 150mm and a thickness of 3mm. This gasket has been made from PTFE. Made in Italy. You can use this boiler gasket on the Vibiemme...

On this page you will find a heating element used in Vibiemme(ELETRESD80022) espresso machines. To be precise in the dual boiler of the Vibiemme Replica and Vibiemme Chimaera. But it also used in the domestic espresso machine the Vibiemme Domobar Super. This specific heating element produces 800W with 230V on 50/60Hz. The element has 2 connections both...

The top HX boiler fitting, a generic item you will find with a lot of espresso machine brands. This ranges from Vibiemme, Grimac, Pavoni, La Scala to Expobar, Brasilia and BFC. This specific item is a casted brass fitting. The side which is screwed into the HX is a ½”BSP-g and the side where the tube to the brewing group goes to is also a...

Every espresso machine boiler needs to have their Safety valve changed with fixed intervals to be sure that when the pressure switch/thermostat fails the pressure doesn’t gets too high. So on this page you will be able to find a safety valve, the biggest size used on espresso machines, the ½”BSP. This valve is calibrated from the...

On this page you will find a NTC thermistor sensor, or just NTC. These probes are connected to a PID, this sensor basically reads the temperature inside the boiler. This specific item is used with the Rocket R 60V and the Rocket R58 espresso machine (A199904679). But this NTC probe is also used in a variety of Vibiemme models like the Vibiemme Domobar...

This brass casted boiler fitting is used on the bottom side of the heat exchanger (HX) of the espresso machine boiler. It attaches to the HX with a ½”male flat sided connection. The other ½”pipe connection is for the return pipe from the brewing group. The ¼”female thread on the bottom is for the injector tube. In this tube the fresh water is injected....

On this product page you will find a heating element suitable for various VBM heating elements. This heating element is suitable for 2 group Vibiemme boilers. The Vibiemme part reference is ELETRES2G4023. This heating element produces 4000W at 230V and has 4 connecting poles. The immersed length of the heating element is 330mm. the heating element has a...

Some heating elements have a triangular flange, these are used for some models of Vibiemme, Brasilia and Aurora Brugnetti. This heating element gasket is made from the fibre material AFM34 by Victor Reinz in Germany. This specific element has the outer dimensions of 80x80mm and a thickness of 2mm and is made from a fibre material. If you are not sure if...

The item on this page is a brass elbow fitting. This fitting can be used on various espresso machine brands such as Faema and Vibiemme. The Vibiemme part reference for this item is RACCP429. This elbow fitting has on both sides a ¼” BSP-G thread. But on 1 side it has a flared connection instead of a conical connection. This item has been...

A Anti vacuum valve is used to prevent that the pressure switch is kicked in too early when heating up. This anti vacuum valve has a male screw thread of ¼” BSP. A anti vacuum valve exists out of multiple components. The body with the threads, in this case made from stainless steel. The plunger, made from brass. This plunger has also the...