Brasilia Classica

This article is one of the earliest designs of the 60mm shower screen. This shower screen is made by IMS CFDR070.  The border diameter is 60mm, it has a internal height of 15,7mm. The internal holes, 112 in total, have a diameter of 2mm Note: this is not a specialty coffee shower, but IMS also produces normal showers. This is, unlike other 60mm models, a...

The item on this product page is a compression spring used in various water inlet systems of Brasilia espresso machines. The Brasilia part references for this item are 02218.0.00.03, 0221800003 and 17694.0.00.03. This compression spring has a outer diameter of 7mm and a length of 33mm. You can use this spring on the Brasilia Cadetta, Brasilia...

The boiler safety valve shown on this page can be used on wide selection of espresso brands such as Brasilia, Wega, Astoria, Grimac, Cimbali, Faema, Marzocco and Carimali. The part references can be found on the extra info tab. This boiler safety valve has a male 3/8” BSP-G thread. The safety valve has been set at 1,8 bar, this is not adjustable. When the...

The o ring on this product page can be used on various espresso machine brands as well with various applications. You can find this o ring with the brands San Marco, La Scala, Astoria, Wega and Brasilia. For the part references check the extra info tab. This o ring has been made from EPDM. The cord diameter is 1,78mm and the inner diameter is 14mm. This...

Brewing group spring 55mm

The copper gasket on this product page is used on various boiler applications with Brasilia espresso machines. The Brasilia part reference number for this item is 07788.0.00.02  This round copper gasket has a outer diameter of 28mm a inner diameter of 22mm and a thickness of 3mm. this gasket has been made in Italy. You can use this gasket on the...

It is quite common on espresso machines that the shower screen in the brewing group is attached with a screw. The issue is that the space between the brewing group and the drip tray is quite often too little for a normal screwdriver. For that reason we have the Wera short version screwdrivers. This specific model is suitable to use in combination with a...

The o ring on this page can be used in various applications in espresso machines. This ranges from water and steam valves, water inlet taps and water levels. The part on this page is a O ring made from the material EPDM. This o ring has a cord diameter of 2,7mm and a inner diameter of 12,1mm. This o ring is produced in Italy. You will find this o ring...

The 2 coffee filterbasket on this page can be used a big variety of espresso machine brands. You can use this basket on brands such as Casadio, Brugnetti, ECM Heidelberg, San Remo, Faema, Vibiemme, La Scala, Grimnac. This filterbasket has been made by the Italian company IMS Filtri. The IMS part reference is CF2T068. Note: this is not a competition...

The solenoid valve on this page is a 3 way solenoid valve, mainly with the application as a brewing group solenoid valve.  Parker has listed this part under 471012 and 471013 The coil used on this solenoid valve is a 9W 220/240V which runs on 50/60Hz. The coil number for this solenoid valve is 483510S6 The valve in question is a 3 way solenoid...

This o ring is one of the most common parts in the world of espresso machines. The main function of this o ring is to seal off a flanged solenoid valve. Every flanged solenoid valve uses 2 of these. But you will also find them in applications like steam and water valves and water inlet taps. The o ring has a wire diameter of 1,78mm and a internal...

On this page you will find a flowmeter made by the Italian company Gicar. This specific model of flowmeter can be used with a variety of brands such as San Remo, La Cimbali, Nuova Simonelli and Brasilia. The Gicar part numbers for this item are (9.0.25.50G, 9.0.96.50G and 9.0.55.50G) The fittings which can be used on the in and outlet of flowmeter are...