Brasilia Opus

The function of a shower screen is to spread the water coming out off the group on a equal way over the coffee. One of the standardized sizes and most common, is the 60mm shower screen. This shower is a pressed model made by IMS IMSDR300. The outer diameter is 60mm, the internal height is 17mm and the diameter of the punctured holes is 2,5mm Note: this is...

The o ring on this page can be used in various applications in espresso machines. This ranges from water and steam valves, water inlet taps and water levels. The part on this page is a O ring made from the material EPDM. This o ring has a cord diameter of 2,7mm and a inner diameter of 12,1mm. This o ring is produced in Italy. You will find this o ring...

The most common location for this to seal off the 3/8” male nut on the top of the Faema E61 and E61 style brewing groups like with Bezzera, Brasilia, Grimac, La Scala, Vibiemme and Wega.But also as a gasket to seal off boiler components with brands like Vibiemme and Grimac, This gasket has been made from the material AFM 34 made by the german company...

The o ring on this product page can be used on various espresso machine brands such as Faema, Cimbali San Marco, Rancilio, Brasilia and Gaggia. The Brasilia part reference number are 00831.0.00.02, 0142800002  and 01428.0.00.02. The Faema part reference number is 400293000, for Rancilio it is 36401003  and for San Marco it is 109108. The o ring...

The o ring on this product page can be used on various espresso machine brands such as Astoria, Vibiemme Cimbali, Wega, Gaggia. With various applications such as water inlets and steam and water valves. The part reference numbers can be found in the extra info tab. This o ring has been made from EPDM. The o ring has a cord diameter of 1,78mm and a...

The gasket on this page is a Polytetrafluoroethylene (PTFE) gasket with the dimensions 35x30x2mm. This specific gasket is used on 3 specific places on the E61 style brewing group (the Faema E61 and Faema E61 legend group use a different size of ptfe gasket). It is used to seal off the top trumpet or drain sleeve, on the side of the group the camme holder...

The solenoid valve on this page is a 3 way solenoid valve, mainly with the application as a brewing group solenoid valve.  Parker has listed this part under 471012 and 471013 The coil used on this solenoid valve is a 9W 220/240V which runs on 50/60Hz. The coil number for this solenoid valve is 483510S6 The valve in question is a 3 way solenoid...

The portafilter gasket on this product page can be used with a wide selection of brands. This portafilter gasket can be used on Brasilia, San Remo, la Scala, Bezzera, Faema, Vibiemme and Pavoni espresso machines. This gasket has been made from NBR. The outer diameter is 72,5mm, the inner diameter is 57mm and the thickness is 8mm. This gasket has been made...

Probably the most used pressure switch used on the Asco P302/6 a 3 phase pressure switch. This pressure switch has been used espresso machines like: La Marzocco, Faema, Cimbali, Astoria, Wega, Nuova Simonelli, La Spaziale, San Remo and so on.The brand Asco used to be the company Sirai, since a while this name has changed but the product remains the same....

On this page you will find a brewing group spray nozzle. This nozzle is one of the most used spay nozzles used in the world of espresso machines. The nozzle has a outer diameter of 30mm and the male thread, which threads into the brewing group, is M10x1mm. What is the purpose of having a nozzle. Well the spray nozzle is located above the shower screen....

The rotation pump on this page is made by the Italian manufacturer Fluid o tech, the pump type is designated as model “Standard” with the Fluid o tech manufacturer code: PA0104AGANN0000 This model of rotation pump is a clamp ring type. The pump face and motor face are pushed against each other and a stainless-steel clamp is place around it....

Brewing group spring 55mm