Brasilia Part category

The most common location for this to seal off the 3/8” male nut on the top of the Faema E61 and E61 style brewing groups like with Bezzera, Brasilia, Grimac, La Scala, Vibiemme and Wega.But also as a gasket to seal off boiler components with brands like Vibiemme and Grimac, This gasket has been made from the material AFM 34 made by the german company...

The boiler gasket shown on this product page can be used on various older models of La Pavoni espresso machines. The Pavoni part reference for this item is 361001 . This boiler gasket has a outer diameter of 235mm a inner diameter of 200mm and a thickness of 3mm. There are in total 10 boltholes. This gasket has been made in Italy. This boiler gasket can...

The product on this page is a gigleur/nozzle for inside a brewing group. This type of nozzle can be used with brands from the Astoria CMA group. For Astoria the part number is 10300001 and for Wega the part number is WY10300001 This specific gigleur is made from brass and has a central hole of 0,7mm. The threads used are a M5 with a pitch of 1mm....

The round bipolar push button on this page is used in various Brasilia espresso machines. The Brasilia part reference for this item is 01976.2.00.08. This round orange/yellow coloured switch is rated up to 16A at 250V. This switch is mounted in a hole which needs to be 25mm. This switch has been made in Italy. You can use this switch on the Brasilia...

It is possible that the flowmeter in your espresso machine starts to leak. On this page you will find a replacement part for most flowmeters. This is the sealing o ring which goes between the flowmeter body and the measuring device. This o ring is suitable for Digmesa and Gicar flowmeters. The cord diameter of this o ring is 1,78mm and the inner diameter...

It is quite common on espresso machines that the shower screen in the brewing group is attached with a screw. The issue is that the space between the brewing group and the drip tray is quite often too little for a normal screwdriver. For that reason we have the Wera short version screwdrivers. This specific model is suitable to use in combination with a...

To hold a coffee filterbasket in it’s place there is always a spring installed in the portafilter. In each modern portafilter is a recess machines to accommodate such a spring. The type on this product page can be used on brands such as Casadio, Carimali, Scala, Cimbali and Rancilio. This spring is made from stainless steel. The cord diameter is...

In some cases, the shower screen is attached with a screw, in most cases that is a Philips or a slotted screw. It is difficult to remove it with a regular screwdriver due to the limited height under the brew group.  But for that you need a shortened slotted screwdriver, in this case the one from the German brand Wera, which fits well under the brewing...

The o ring on this product page is used on various Brasilia steam and water valves on various models. The Brasilia part references for this item are 05825.0.00.02 and 0582500002. This o ring is made from EPDM. The cord diameter is 2,62mm and the internal diameter is 25,07mm. This o ring is made in Italy.  You can use this o ring on the...

On this page you will find a o ring with the dimensions 10,78x2.62mm. It is made from FKM (viton is a registered trade brand, but the material is identical) This o ring is used in a variety of locations in espresso machines. It is used with steam and water wands in espresso machines with brands like: Marzocco, Casadio, Vibiemme, Grimac, Cimbali and Faema....

This single coffee filterbasket has been made by the Italian filterbasket manufacturer IMS Filtri, their reference number for this item is MA1T108. This filterbasket can be used on a variety of espresso machines. This ranges from Brasilia, ECM Conti, Elektra, Kees Van Der Westen, Marzocco to Rocket, Slayer, Vibiemme, Nuova Simonelli and Victoria Arduino....

Brasilia portafilter single spout Return to the portafilter  overview