Filter by
Categories
Price
Manufacturers
Type part
more... less
Brand
more... less
Filter

Brewing group

On this overview page you will find basically all the parts you are going to need for your espresso machine brewing group. The most well known brewing group around is the E61 lever brewing group, which originates from the Faema E61 espresso machine. It has its origin with Faema, but there are a lot of differences between the brands they use. You can find this type of brewing group can be found on brands such as San Remo, ECM Heidelberg,Vibiemme, Bezzera, Wega, Grimac, La Scala and Brasilia.

On this page you will find the standard general maintenance parts like the portafilter gaskets, shower screensbrewing group gaskets and brewing group filter mesh. But also items which don’t get replaced that often like solenoid valves, springs, microswitches, heat exchangers and diffusers plates.

In every category you can search, with the help of the filter, for the espresso machine brand you need replacement parts for. If you can’t find the part your looking for don’t hesitate to contact us.

Espresso machine brewing group parts

Rancilio group locking gasket 72x72x2mm

The group locking gasket on this page is used on various older Rancilio espresso machines. The Rancilio part reference number for this item is 36220004 This group locking gasket is placed between the body of the brewing group and the body of the frame/boiler. This square group locking gasket is 72x72mm and has a thickness of 2mm. The gasket has been made...
€5.43

Bezzera portafilter gasket 72X55,5X9,3 original

The filter holder gasket on this page is a OEM/original Bezzera spare part. This part has the Bezzera part reference 7493008. This item is dimension wise and optically the same as the portafilter gasket as in the accessory tab below. But what is the difference. This gasket has a shore number of 75 and the other gasket has a shore number of 90. The higher...
€4.73

PTFE gasket 25.4x21.2x5.5mm

This flat Polytetrafluoroethylene (PTFE) gasket 25.5x21x5mm is used on Vibiemme (GUARCASUTEPI) espresso machine brewing groups. As well in the manual lever brewing group as well for the solenoid group. This part seals off the bottom off the upper sleeve in the brewing group. If you are not sure if this item will fit your Vibiemme Domobar, Vibiemme Replica...
€4.01

Astoria Wega shower holder CTS group 10.5mm

The shower holder diffuser on this page can be used on various Astoria and Wega espresso machine. The Astoria part reference number 25627004 and the Wega part reference is WY25627004. This brass shower diffuser has a outer diameter of 52mm and a height of 10,5mm. The central hole is 5,5mm. This item has been made in Italy. You can use this shower...
€59.28

La Spaziale shower support 11mm

On this page you will find a shower screen holder diffuser which is suitable for La Spaziale brewing groups. This shower screen holder and diffuser spreads the water evenly before it goes true the shower screen. this item is compatible with part number 01941 The dimensions of this part are: external diameter of 53mm a height of 11mm and a hole diameter...
€48.15

Vibiemme chromed lever sleeve

The Vibiemme RACCCACOGR camme shaft holder on the manual Vibiemme espresso machines is also quite different then with a standard E61 style brewing group. This part is, similar to the drain sleeve, attached to the side of the brewing group with 2 M6 allen bolts. In the situation of the Vibiemme solenoid valve group in E61 style, this is a chrome plated...
€48.15

Faema shower holder

The shower holder diffuser on this page can be used on various older Faema espresso machine models. The Faema part reference for this item is 4161131768. This shower holder has been made from brass. The external diameter is 58,5mm, the height is 9mm. The central hole has a diameter of 5,5mm. This shower holder has been made in Italy. You can use this...
€22.56

La Spaziale shower support 13mm

The la Spaziale shower support on this page is suitable for a variety of models of the La Spaziale brand. This La Spaziale product has the product number 00641 This shower screen holder and diffuser distributes the water coming from the brewing group more equally before it goes true the shower screen. The shower holder has a external diameter of 53mm...
€48.56
Brooks Parts | Victoria Arduino shower screen 57,5mm reinforced original Brooks Parts | Victoria Arduino shower screen 57,5mm reinforced original
  • New

Victoria Arduino shower screen 57,5mm reinforced original

The shower screen on this page is a shower screen used on various Victoria Arduino espresso machines. This item is a OEM/Original Victoria Arduino spare part. The part reference number is 03000066.R This shower screen is made up out of 2 filter meshes. One made from pressed stainless steel and the other one, a finer wire mesh. In this wire mesh you can...
€19.24

Faema E61 plug for camme holder

This ½” chrome plated stuffing nut has a central hole of 10,7mm. The item itself has a height of 17mm. You need a metric key 22 to install this item. This is quite a common key size in most peoples toolbox. But what is the function of this part and where can it be found. This threaded stuffing gland is used in the side of the Faema E61, Faema E61 Legend...
€7.11

Bezzera portafilter gasket o ring 71,2x55x8,1mm

The item on this product page is a OEM/original portafilter gasket o ring used on a variety of Bezzera espresso machines. The part reference number for this item is 7496092 The o ring itself is made from food safe nbr. The cord diameter is 8,1mm, the inner diameter is 55mm and the outer diameter is 71,2mm. You can use this portafilter o ring on the...
€5.57

Faema E61 gasket PTFE 36.5x30x2mm

This PTFE gasket can be used on the famous Faema E61 brewing groups, but also on a variety of E61 style of brewing groups. Like with La Scala, Grimac, Pavoni, Wega and Fiorenzato. The part reference numbers can be found in the extra info tab. This flat gasket is made from the material PTFE. The outer diameter is 36,5mm and the inner diameter is 30mm and...
€0.75