Faema Part category

The item on this page is a gasket holder for various espresso machine brands, such as Vibiemme and Faema. The part reference for this item is for Faema 4151018538 and for Vibiemme RACCPOGVAESE, This brass gasket holder has a outer diameter of 17mm/8,6mm and a internal diameter of 6mm. the height is approx. 9 and 6mm. this item has been made in...

On this page you will find a touchpanel membrane for the Faema Enova S. This membrane can only be used on the S versions and not on the A models. The Faema part reference for this item is 915201000. This adhesive membrane has a length of 150mm and a height of 38mm and has been manufactured in Italy.

Faema E61 expansion valve spring

The manual thermostat on this page can be used on various espresso machine models. You will find this thermostat on brands such as Faema, Astoria and Wega. This thermostat is one with a manual reset. It shuts itself off at 145 degree Celsius. The thread at the bottom is a male M4. You can use this thermostat on the Wega concept, Wega Mininova, Astoria...

The switch on this page is a bipolar switch used on various older Faema espresso machines. As well as on one Cimbali espresso machine. The Faema part reference for this item is 3341132683 and for Cimbali 532-021-708  This is a bipolar switch which is rated up to 16A at 250V. This switch has been made in Italy. You can find this model of switch...

On this product page you will find a double manometer suitable for various Faema and Bezzera espresso machine models. The Bezzera part reference for this item is 7432524  The pressure gauge has on top the boiler pressure, which goes from 0 to 3bar. At the bottom you have the pump pressure this range goes from 0 to 15bar.  The body of this...

The touchpanel membrane on this page is used on the Faema Express espresso machines. The Faema part reference for this item is 3761130701. This touchpanel membrane has in total 8 keys. 6 of them are for the pre-set volumetric dosing. One of them is the start and other is the stop button. This item has been made in Italy.

The rotation pump on this page is from the bolt on type. The specific model is made by the pump manufacturer Procon and it is made in Ireland. The pump is NSF certified and has the Procon part number 132E060F114B150 This specific pump type has a slightly different flange then most Procon pumps used on espresso machines. This type is a bolt on flange, and...

On this page you will find a heating element which is used on various Faema espresso machines. It is for a 2 group Faema E61 vintage espresso machine our first choice. The Faema part reference for this item is 3541134417  This heating element produces 2440/2900W with 220/240V, with 4 connecting poles. The immersed length of the heating element is 290mm....

The boiler gasket on this page can be used on various older Faema espresso machines. The most famous of them is the Faema E61. This boiler gasket is used in combination with the boilers with the aluminium boiler flanges. This gasket has a outer diameter of 245mm a inner diameter of 205mm and a thickness of 2mm. This gasket has 2 side which have been...

On this page you will find a vibration pump, not from Ulka, but from Fluid o tech. Fluid o tech is less known for their vibration pumps. The fluid o tech vibration pump on this page is part 1106PAAAM1E0000 This specific vibration pump has 45W but runs on 24V at 50/60Hz. The vibration pump as on both sides a 1/8” BSP-G female fitting. The pump is no...

the item on this product page is a OEM/Original Faema spare part. This item is a brass spring guide bushing. This brass spring guide bushing is used on the brewing groups used on the Faema E64, Faema E66, Faema P4 and the Faema P6