Filter by
Type part

La Cimbali M27 - Motor and pump

The motor and pump on the la Cimbali M27 RE is one which is quite generic with most La Cimbali espresso machines.

The pump installed on the Cimbali M27 RE is a bolted pump which produces 180 L/H this model of pump is used on the 2 and 3 group espresso machines. This pump is bolted to the flange of the motor. To connect the shaft of the pump you have a coupling set, this set allows to go from a small shaft to a D style of motor shaft.  The motor is a flanged 220/240V single phase motor, so it is fitted with a 10 uf capacitor to start the motor.

If you can’t find the correct pump or motor component, don’t hesitate to contact us.

La Cimbali M27 espresso machine parts motor and pump

Faema rubber pump-motor connector 40 mm

To connect a flange pump and flange motor to each other you need to have 2 coupling plates and a rubber middle coupler which connects the coupling plates to eachother. This rubber motor pump coupling is universal and can be used with the metal coupling plates with a rounded off shaft and with the slitted pump coupling connection. These type of couplings...

Cimbali Faema flange motor 150W 220/240V

This motor made by SMA Machinery with model number YSC102/60-4. The output of this motor is 150W at 220/240V at 50/60Hz. To start the espresso machine motor there is a 10 µf capacitor. This model type is a bolt on motor. The rotations pump is connected to the flange of the coffee machine motor with 2 M8 bolts. This style of connecting is quite common with...

O ring 25,07x2,62mm EPDM

The o ring on this product page is used on various Brasilia steam and water valves on various models. The Brasilia part references for this item are 05825.0.00.02 and 0582500002. This o ring is made from EPDM. The cord diameter is 2,62mm and the internal diameter is 25,07mm. This o ring is made in Italy.  You can use this o ring on the...

Fluid o tech flange pump 150 L/H

On this page you will find a clamp on rotation pump. This specific model Compact Plus (MO0154EAADN) has been made by the Italian company Fluid o tech in Italy. This type of coupling is only used with a couple of coffee machine brands, which are all part of the La Cimbali Group. So, you will find them with the espresso machines Casadio, La Cimbali and...

Nuert flange pump 150 L/H compact

On this page you will find a Nuert rotation flange pump. This model type can only be used on espresso machines made by the La Cimbali group. This specific model of rotation pump is called the “Compact Plus” with part number PRM15FZ1N_EGND. The pump in question is a flange pump. This pump is attached the espresso machine motor with 2...

Nuert Flange pump Stainless steel 180 L /H

This Nuert pump is one of the few espresso machine pumps made in stainless steel. The majority of all the pumps are still made from low lead brass. This specific pump is designated as a “Compact Plus “pump and has the part number PRM15FZXN_EGND. This pump is specially made for the espresso machines models made by the La Cimbali group. There...

Stainless steel filter for large pump 18x2.5 mm

On this page you will find a stainless-steel water filter. Suitable for pumping the water of the pumps used on espresso machines manufactured by the Cimbali Group. This filter is used with the Casadio part number 490055000, Cimbali part number 490-055-000 and the Faema part number 490055000. This stainless-steel wire mesh filter has a outer diameter of...