La Cimbali M32 Dosatron - Motor and pump

The o ring on this product page is used on various Brasilia steam and water valves on various models. The Brasilia part references for this item are 05825.0.00.02 and 0582500002. This o ring is made from EPDM. The cord diameter is 2,62mm and the internal diameter is 25,07mm. This o ring is made in Italy.  You can use this o ring on the...

On this page you will find a clamp on rotation pump. This specific model Compact Plus (MO0154EAADN) has been made by the Italian company Fluid o tech in Italy. This type of coupling is only used with a couple of coffee machine brands, which are all part of the La Cimbali Group. So, you will find them with the espresso machines Casadio, La Cimbali and...

The part on this product page is a brass water filter. This filter is screwed into the espresso machine water pump. You can find this type of filter with various espresso machine brands such as Brasilia, Carimali, Casadio, Cimbali and Faema. This brass water filter has a male in and outlet, these threads are 3/8” BSP-G. Inside this brass housing is...

This Nuert pump is one of the few espresso machine pumps made in stainless steel. The majority of all the pumps are still made from low lead brass. This specific pump is designated as a “Compact Plus “pump and has the part number PRM15FZXN_EGND. This pump is specially made for the espresso machines models made by the La Cimbali group. There...

The rotary vane espresso machine pump. There are various brands which manufacture these pumps like Fluid o tech, Nuert and Procon. The pump on this page is made by the company Procon. Part number 132A060F123B The pump on this page is called a rotary vane clamp pump. The pump is clamped on a flange with a stainless steel clamp. If you tighten this clamp...

On this page you will find a motor mainly used for older model espresso machines from Faema like: Faema Due, Faema E91, Faema E92, Faema Star and Faema Tronic. This motor is build by the Italian company Elettromeccanica ing. F. Arduini. This is a 170W pump motor which runs on 220V with 50/60hz. To start the motor you need a start capacitor, on this...

On this page you will find a stainless-steel water filter. Suitable for pumping the water of the pumps used on espresso machines manufactured by the Cimbali Group. This filter is used with the Casadio part number 490055000, Cimbali part number 490-055-000 and the Faema part number 490055000. This stainless-steel wire mesh filter has a outer diameter of...

On this page you will find a Nuert rotation flange pump. This model type can only be used on espresso machines made by the La Cimbali group. This specific model of rotation pump is called the “Compact Plus” with part number PRM15FZ1N_EGND. The pump in question is a flange pump. This pump is attached the espresso machine motor with 2...

With Faema and La Cimbali flange pumps there is a additional coupling between the flanged motor and the flanged pump. This coupling is made of 2 metal couplings. 1 connects to the espresso machine motor shaft, the other connects to the pump. Note: this coupling has a round shaft opening with a flat side. The metal connectors have a OD of 40mm. In between...

To connect a flange pump and flange motor to each other you need to have 2 coupling plates and a rubber middle coupler which connects the coupling plates to eachother. This rubber motor pump coupling is universal and can be used with the metal coupling plates with a rounded off shaft and with the slitted pump coupling connection. These type of couplings...

The rotary vane pump on this page is slightly different then a normal rotary vane pump. This specific model is made by Procon in Ireland. (CO1309BF and 131A060F123B) with a NSF certification The model pump is a clamp on rotary vane pump. The flanges of the pump and motor are pushed against each other and a stainless steel clamp is placed over it and...