La Pavoni PUB V parts

This portafilter gasket has a outer diameter of 73mm a inner diameter of 57mm and a thickness of 8,5mm. 73x57x8,5mm. This type of brewing group gasket is one of the most standard portafilters around. You will find this on the Faema E61 groups as well as on the E61 style groups used by Vibiemme, La Scala, Bezzera, San Remo, Fiorenzato and Grimac. Of this...

In some cases, the shower screen is attached with a screw, in most cases that is a Philips or a slotted screw. It is difficult to remove it with a regular screwdriver due to the limited height under the brew group.  But for that you need a shortened slotted screwdriver, in this case the one from the German brand Wera, which fits well under the brewing...

On this page you will find one of the most used brewing group solenoid valves in espresso machines. But this is instead of a 230V version a 115V version. This solenoid valve has been manufactured by the company Parker. The Parker parts reference for this solenoid valve is 393106J or 393111J This 3-way solenoid valve is a model with a flat flange, this...

The solenoid valve on this page is a 3 way solenoid valve, mainly with the application as a brewing group solenoid valve.  Parker has listed this part under 471012 and 471013 The coil used on this solenoid valve is a 9W 220/240V which runs on 50/60Hz. The coil number for this solenoid valve is 483510S6 The valve in question is a 3 way solenoid...

The item on this product page is a OEM/Original wire mesh water filter, used in various Gaggia espresso machines. The Gaggia part reference for this item is WGADM0962/001. This stainless steel water filter is used  to make sure that there doesn’t get any debris in solenoid valves. The outer diameter is 8 and 6,5mm the length of this water...

Probably the most used pressure switch used on the Asco P302/6 a 3 phase pressure switch. This pressure switch has been used espresso machines like: La Marzocco, Faema, Cimbali, Astoria, Wega, Nuova Simonelli, La Spaziale, San Remo and so on.The brand Asco used to be the company Sirai, since a while this name has changed but the product remains the same....

The steam valve bushing on this page is used in one of the most common steam and water valves used. This item can be used with brands such as Marzocco, La Carimali, San Remo, La Scala, Faema, La Pavoni and BFC. Against this brass bushing seats a valve shaft spring. This bushing pushes against 2 o rings which seal off the steam valve shaft. This bushing...

On this page you will find a ODE 2 way solenoid valve used as water inlet valve for NS and VA espresso machines. This ODE 2 way solenoid valve has the part number 21A2K0R25-XC This specific valve is a 2 way inlet water valve. It has on both sides ¼” BSP female threads. The orifice inside the valve has a diameter of 2,5mm. The sealing...

This type of fitting is a reduction. From 1/8 to ¼ and can be used on numerous espresso machine brands such as Marzocco, Grimac, La Scala, Astoria, Spaziale, Wega, Pavoni and Rancilio. The part reference numbers can be found in the extra info tab. This fitting is made from machined brass. On one side is a male 1/8” BSP-G on the other side is...

The switch on this is a push button bipolar switch and can be used on various Astoria espresso machine models. The Astoria part reference number for this switch is 18268.  This switch is a so called momentary switch, this switch goes automatically to the 0 position. The switch is rated for 16A at 250V. There is a indicator light inside the switch....

The compression spring on this page can be used on a variety of espresso machine brands such as La Pavoni and Gaggia. This compression spring is mainly used in a steam and water valve. The La Pavoni part reference is 311409 and the Gaggia part reference is WGARB0882  This stainless steel compression spring has a outer diameter of 12mm and a...

O ring  5.7x1.9mm nbr