La Pavoni PUB V parts

The item on this product page is a crushable copper gasket. This gasket can be used with a variety of espresso machine brands and applications. You can use this gasket with brands such as Cimbali, Faema, Vibiemme and Pavoni. The part reference for this item is for Faema 4701135891, for Pavoni 362000/362007/362075, for Vibiemme GUARTACHGR. This round...

The item on this page is a espresso machine pump which can only be found on various La Pavoni espresso machines. This pump is manufactured by the company Procon in Ireland. The Procon part references are 112B035F123B, 112B035F123B+, 112B035F123B150 and CB51505BLF. The La Pavoni part reference numbers are 452006  and 452010.  This pump is a...

The top HX boiler fitting, a generic item you will find with a lot of espresso machine brands. This ranges from Vibiemme, Grimac, Pavoni, La Scala to Expobar, Brasilia and BFC. This specific item is a casted brass fitting. The side which is screwed into the HX is a ½”BSP-g and the side where the tube to the brewing group goes to is also a...

On this page you will find a 3/8”cap. This cap is a generic item and can be used in a variety of applications in espresso machines. This male cap is made out off brass. The fitting used on this plug is 3/8” BSP-G. This plug can be used in a variety of espresso machines like the Nuova Simonelli Appia, Astoria Argenta, Astoria Denise, La...

On this product page you will find a double scale manometer suitable for various La Pavoni models. The La Pavoni manometer has the part reference 453007. This pressure gauge is a double one. The boiler pressure gauge has a scale from 0 to 2,5 bar. The pump pressure gauge goes from 0 to 16 bar. The body of this pressure gauge has a outer diameter of 63mm...

The solenoid valve on this page is a 3 way solenoid valve, mainly with the application as a brewing group solenoid valve.  Parker has listed this part under 471012 and 471013 The coil used on this solenoid valve is a 9W 220/240V which runs on 50/60Hz. The coil number for this solenoid valve is 483510S6 The valve in question is a 3 way solenoid...

The item on this product page is a M6 washer, this washer can be used on various steam and water valves. Such as the brands Marzocco, Royal, Carimali and San Remo. The Carimali part reference is 93.00058, the Marzocco reference is L165/9 and for San Remo it is 10402040. This flat washer is made from zinc plated steel, this is not a issue seen its not in...

The item on this product page is a L shaped fitting, with a male and a female connection. This fitting can be used on home build projects, but also on espresso machine brands such as Bianchi, Grimac, Ducale vending and Lavazza. This fitting is made from casted and machined brass. The item can be nickel plated, this is not always the case. On one side you...

On this page you will find a ODE 2 way solenoid valve used as water inlet valve for NS and VA espresso machines. This ODE 2 way solenoid valve has the part number 21A2K0R25-XC This specific valve is a 2 way inlet water valve. It has on both sides ¼” BSP female threads. The orifice inside the valve has a diameter of 2,5mm. The sealing...

Probably the most used pressure switch used on the Asco P302/6 a 3 phase pressure switch. This pressure switch has been used espresso machines like: La Marzocco, Faema, Cimbali, Astoria, Wega, Nuova Simonelli, La Spaziale, San Remo and so on.The brand Asco used to be the company Sirai, since a while this name has changed but the product remains the same....

The item on this page is a 3 way solenoid valve made by the brand Lucifer. This item is slightly different, seen it’s not a standard 220/230V model. But it is a 110V model. This 3 way valve can be used on a variety of espresso machine brands such as Casadio, Brugnetti, San Marco, La Scala, Cimbali, Grimac, Faema, Astoria, Nuova Simonelli, La...