Vibiemme Minimax

The portafilter on this product page is a bottomless portafilter which can be used on a variety of Vibiemme brewing groups. This is the case for the commercial and the domestic espresso machine models. This portafilter has no spout, but a bottom which has been cut out. The ear orientation is 90 degree and the thickness of the ears is 5,5mm. The...

On this page you will find a portafilter gasket suitable for a variety of brands such as Faema, San Remo, Cimbali, Vibiemme, La Scala, Bezzera, Pavoni and Isomac. This portafilter gasket has been made from NBR. The outer diameter is 73mm the inner diameter is 57mm and the thickness of this gasket is 8mm. This gasket has been made in Italy. You can use...

This steam pipe bushing is a important element in the sealing and functioning of a steam and water valve. This bushing is pushed down on one side with a spring, this bushing has on the other side a hollow shape so that the ball of the steam and water valve can slide smoothly over the brass. This brass bushing has multiple dimensions. The external...

It is quite common on espresso machines that the shower screen in the brewing group is attached with a screw. The issue is that the space between the brewing group and the drip tray is quite often too little for a normal screwdriver. For that reason we have the Wera short version screwdrivers. This specific model is suitable to use in combination with a...

The triangular non return valve on this page can be used in La Spaziale and Vibiemme espresso machines. This brass made part holds a small o ring which is 1,78x8,73mm. The o ring seals off the non return valve and non return valve makes sure that the water van only flow one way. The triangular shaped non return valve has a diameter of 6,5mm and 12mm. The...

O ring 7.2x1.9mm epdm

The steam valve bushing on this page is used in one of the most common steam and water valves used. This item can be used with brands such as Marzocco, La Carimali, San Remo, La Scala, Faema, La Pavoni and BFC. Against this brass bushing seats a valve shaft spring. This bushing pushes against 2 o rings which seal off the steam valve shaft. This bushing...

This o ring is one of the most common parts in the world of espresso machines. The main function of this o ring is to seal off a flanged solenoid valve. Every flanged solenoid valve uses 2 of these. But you will also find them in applications like steam and water valves and water inlet taps. The o ring has a wire diameter of 1,78mm and a internal...

The dosing device on this page can be used for a variety of Vibiemme espresso machines. The Vibiemme part reference for this item is ELETDOS3GRCTT. This item has been made by the Italian company Gicar. The Gicar code for this item is 9.5.15.28G00 This dosing device is called the Dosatura 3d 3GRCT XLC 240V ac. This is a 240V model.  Always check the...

The item on this product page is a PTFE gasket. This gasket is in use in various applications such as brewing groups, steam and water valves and water inlet valves. You can use this gasket with brands such as Carimali, Vibiemme, Scala, Grimac, Astoria, Pavoni, Wega and Victoria Arduino This gasket has been made from the material PTFE. The outer diameter...

The function of a shower screen is to spread the water coming out off the group on a equal way over the coffee. One of the standardized sizes and most common, is the 60mm shower screen. This shower is a pressed model made by IMS IMSDR300. The outer diameter is 60mm, the internal height is 17mm and the diameter of the punctured holes is 2,5mm Note: this is...