Vibiemme - Steam/water valve
The item on this product page is a chrome nut used for a steam and water valve used with various espresso machine brands. This nut can be found on brands such as ECM Heidelberg, Fiorenzato and Vibiemme. The ECM Heidelberg part reference number is P6003.1, for Fiorenzato it is A2200264 and for Vibiemme it is RACCDAFISSRLO.
This chrome plated nut...
€6.40
Steam water valve joint o ring 12,1x2,7mm EPDM
The o ring on this page can be used on various steam and water valves used on San Remo espresso machines. The San Remo part reference number for this o ring is 10402082
This o ring has been made from EPDM. This o ring has a cord diameter of 2,7mm. the inner diameter is 12,1mm. This o ring has been made in Italy.
You can use this o ring on the San...
€0.89
Vibiemme steam pipe left
On this page you will find a Vibiemme steam tube which can only be used for a left handed machine side. This Vibiemme (TUBILANCVASXI) Steam tube is a original item and is used on the following espresso machine models: Vibiemme Chimaera, Vibiemme Cubo and the Vibiemme Replica.
As earlier mentioned this is Left Hand side steam tube. The article is made out...
€91.00
Steam and water valve spring bushing
The steam valve bushing on this page is used in one of the most common steam and water valves used. This item can be used with brands such as Marzocco, La Carimali, San Remo, La Scala, Faema, La Pavoni and BFC.
Against this brass bushing seats a valve shaft spring. This bushing pushes against 2 o rings which seal off the steam valve shaft.
This bushing...
€1.00
Spring for steam valve 10.8x30 mm
The compression spring on this product page is used in various steam and water valves. Brands which used this model of compression spring where ECM Heidelberg, Vibiemme and La Scala. The part references are for Vibiemme MOLLTUVA, MOLTUVA and MOLTUVARUBEVO. For ECM Heidelberg the part reference number is P6003.13
This stainless steel...
€3.26
Tap joint spring guide
This steam pipe bushing is a important element in the sealing and functioning of a steam and water valve. This bushing is pushed down on one side with a spring, this bushing has on the other side a hollow shape so that the ball of the steam and water valve can slide smoothly over the brass.
This brass bushing has multiple dimensions. The external...
€0.96
Hardened steel shaft lever tap
The item on this page is a hardened steel pin for a steam and water valve. This shaft can be used on various espresso machine brands such as ECM Heidelberg, Fiorenzato, Marzocco and Vibiemme. The ECM Heidelberg part reference number is P6003.3, the Fiorenzato part reference is A2200266, the Marzocco reference is B.1.004/3 and the Vibiemme part...
€9.73
o ring gasket 7,2X1,9mm nbr
On this page you will find the o ring with the cord diameter of 1,9mm and a internal diameter of 7,2mm. This specific o ring is used with a variety of applications in expresso machines. For instance, with Expobar in the water inlet valve. For Faema in the cappuccinatore.
With Vibiemme, La Scala, Fiamma, Grimac, Brasilia, ECM Heidelberg and La Carimali in...
€0.45
Vibiemme Lollo water/steam tap
On this product page you will find a chrome plated steam and water valve suitable for the Vibiemme Lollo espresso machines. The Vibiemme part reference of this item is ASSRACCRUBLOLLO
This steam and water valve has been made from brass and chrome plated afterwards. The in and outlet fittings are on both sided a 3/8”BSP-G thread. This...
€73.19
Brass half nut 1/2" 6mm
Brass half nut 1/2" BSP-G 6mm
Return to our fitting overview
€2.49
Faema E61 steam valve pin
This brass tap spindle is used a the Faema E61 steam and water valve and the valves which have resemblance to the e61 valve used by brands like Vibiemme, La Scala and Grimac.
When the shaft axle is turned open or closed, this tap spindle pushes against the valve seat. Which opens or closes the steam/water valve. This specific brass tap spindle has a...
€2.15