Filter by
Manufacturers
Type part
more... less
Type
Price
Filter

Wega Nova

Wega Nova Espresso Machine Parts

The Wega Nova is one of the older models in the Wega espresso machine lineup, and despite its age, it remains in production today. This model has been updated both technically and aesthetically over time. The Wega Nova is available in several versions, including the Wega Nova Leva, Wega Nova EPU, and Wega Nova EVD.

Wega Nova espresso machine parts

Astoria Wega valve nut

This brass nut you will find on almost every steam and water valve of the Astoria CMA group. This brass nut holds the steam and water valve shaft in place inside the gasket holder. The Astoria part reference for this item is 25461 and the Wega part reference for this item is WY25461  You can find this item basically on every model like the Astoria...
€4.38

Filterholder suplement gasket 73x59x0.8mm

The paper shim on this page is one of the most widely used paper shim. You can use this type with a wide selection of espresso machine brewing groups. What are the dimensions of this paper shim? They have a outer diameter of 73mm, a inner diameter of 59mm and a thickness of 0,8mm. What does a paper shim do? Brewing group locking mechanisms wear due to...
€0.52

E61 shower screen old style 60mm

This article is one of the earliest designs of the 60mm shower screen. This shower screen is made by IMS CFDR070.  The border diameter is 60mm, it has a internal height of 15,7mm. The internal holes, 112 in total, have a diameter of 2mm Note: this is not a specialty coffee shower, but IMS also produces normal showers. This is, unlike other 60mm models, a...
€3.42

Double scale boiler pump manometer 0 - 2.5 / 0 -16 bar

On this product page you will find a double pressure gauge. This pressure gauge can mainly be found on espresso machines such as Astoria and Wega. The Astoria part reference for this manometer is 1245504 and for Wega the part reference is WY21107  The manometer has on one side the boiler pressure, this goes from 0 to 2,5bar. The other side has the...
€36.96

Astoria/Wega brass nut M3

The nut on this page is a M3 nut made from brass. You will find this type of nut on variety of steam and water valves of  Astoria and Wega espresso machines. The Astoria part reference for this item is 23050 and the Wega part reference is WY23050. This brass nut has a metric female thread of M3. The nut has made according to specifications of...
€0.68

Bremas main switch 20A 690V

The Bremas main switch on this page is used on coffee grinders as well on espresso machines. You will find this model switch on the brands Mazzer, Astoria and Wega. The list of part references can be found in the extra info tab. This Bremas selector switch is rated up to 20A at 690V. This switch has 2 positions 0-1. The switch does not come with a knob....
€64.57

Faema E61 camme spring 15x25mm

This stainless steel compression spring with the dimensions of 15x25mm is normally used as a camme spring on a Faema E61 brewing group or on E61 style brewing groups.  Like with the Faema E61, Faema E61 legend, Grimac, Isomac, Pavoni, Wega and a variety of other brands which use a e61 style of brewing group. Besides that option, this model...
€1.21

Wega portafilter gasket 73x56x9mm

On this page you will find a portafilter gasket suitable for Wega espresso machines. The corresponding Wega part number for this item is W10322  This portafilter gasket has a outer diameter of 73mmm a inner diameter of 57mm and a thickness of 9mm. This gasket is made from NBR and has a shore number of 75. This gasket can be used in the E61 style...
€3.17

Faema E61 group upper plug

On the top of a Faema E61 brewing group or a E61 brewing group is always the final item. That’s a chrome plated 3/8” male plug. Nothing else nor something special. This is generic part which can also be used in a variety of situations then a E61 brewing group, but also on different locations on a espresso machine. Like on the boiler with a...
€4.10

Compression spring 13x42mm

This stainless steel compression spring is used in the Faema E61 and E61 style brewing groups. But what does this specific do? Well this is the last compression spring in the brewing group. It is the compression spring in the brewing valve which closes the exhaust valve all the way at the bottom of the E61 brewing group. Besides the E61 group spring it...
€1.61

Brass washer 18x12x1mm

On this page you will find a brass washer which is suitable for the Astoria and Wega water level assembly. This washer makes sure that the gasket doesn’t tear when the sight glass nut is tightened. This washer has the Astoria reference 25652 and the Wega part is WY25652  This gasket has a outer diameter of 18mm a inner diameter of 12mm...
€1.66

Models Available in the Wega Nova Series

  • Wega Nova Leva
  • Wega Nova EPU
  • Wega Nova EVD

Wega Nova Leva

The Wega Nova Leva is the lever-operated version of the Wega Nova. In this model, brewing pressure is not generated by a pump but through a manually operated compression spring. This traditional method is highly regarded by espresso enthusiasts who prefer manual control over their brewing process. If you're looking for more information or parts for lever-operated machines, we recommend visiting our dedicated site, Brooks-espressomachines, which focuses on lever espresso machines.

Wega Nova EPU

The Wega Nova EPU is the basic manual version of the Wega Nova. With this model, users start and stop the brewing process by pressing a button. There is no volumetric control, meaning you must manually manage the brewing time to achieve your desired coffee strength.

The Wega Nova EPU is available in various configurations:

  • Single group and Junior versions
  • 2-group and compact versions
  • 4-group espresso machine

These machines can operate on 120V, 230V, or 400V power, making them versatile for different electrical setups.

Wega Nova EVD

The Wega Nova EVD shares many similarities with the EPU version but comes equipped with volumetric dosing. This means that users can select their desired coffee type from a touch panel, and the machine will automatically stop the brewing process once the required amount of water has been dispensed. This feature ensures consistency in every cup of coffee and is more user-friendly for busy cafes or restaurants.

Like the EPU model, the Wega Nova EVD is available in multiple versions:

  • Single group and Junior versions
  • 2-group and compact versions
  • 4-group espresso machine

These models also support 120V, 230V, and 400V power configurations.

Wega Nova Spare Parts from Brooks

At Brooks Parts, we supply a wide range of parts for the Wega Nova espresso machine, whether you're using the Leva, EPU, or EVD versions. From boiler components to brewing group parts, we have everything you need to keep your Wega Nova running smoothly. If you're unsure which parts you need, feel free to contact us for assistance.