Astoria Pratic
On this page you will find a o ring with the dimensions 10,78x2.62mm. It is made from FKM (viton is a registered trade brand, but the material is identical) This o ring is used in a variety of locations in espresso machines. It is used with steam and water wands in espresso machines with brands like: Marzocco, Casadio, Vibiemme, Grimac, Cimbali and Faema....
€0.90
Safety valve 3/8" 2.0 bar CE PED IV certified
The most important part on a espresso machine is the safety valve. This part prevents that a boiler can explode. The safety valve will open up when the pressure inside the boiler becomes too high.
This specific safety valve is made out of brass. The thread type used for this safety valve is 3/8”BSP-G. The calibrated pressure of the valve is 2.0...
€12.87
Double scale boiler pump manometer 0 - 2.5 / 0 -16 bar
On this product page you will find a double pressure gauge. This pressure gauge can mainly be found on espresso machines such as Astoria and Wega. The Astoria part reference for this manometer is 1245504 and for Wega the part reference is WY21107
The manometer has on one side the boiler pressure, this goes from 0 to 2,5bar. The other side has the...
€36.96
Single pole momentary switch 16A 250V
The switch on this page is a single pole switch. This switch is used in various espresso machine such as Astoria, Wega and Gaggia espresso machines. The Astoria part reference is 18371058, for Wega WY18371058 and for Gaggia 5024003000.
This single pole switch is rated up to 16A at 250V. This switch has been made in Italy.
This single pole switch...
€8.34
Astoria Wega steam valve nut
The steam and water valve nut on this page can be used on almost every Astoria and Wega steam and water valve. This axle nut makes sure that there is a constant pressure on the valve shaft spring, which prevents leaking from the valve shaft.
This item is a OEM/original Astoria/Wega spare part. The Astoria part number for this item is 25385001 and...
€7.51
Astoria Wega steam valve gasket holder
This steam and water tab gasket holder can be used in almost every steam and water valve used by the espresso machine manufacturer Astoria CMA. This item can be found in Astoria espresso machines with part reference 25616 and with Wega espresso machines under the reference WY25616.
This gasket holder has on one side room for the flat gasket with the...
€7.51
Boiler safety valve 3/8" 1.8 bar CE-PED
The boiler safety valve shown on this page can be used on wide selection of espresso brands such as Brasilia, Wega, Astoria, Grimac, Cimbali, Faema, Marzocco and Carimali. The part references can be found on the extra info tab.
This boiler safety valve has a male 3/8” BSP-G thread. The safety valve has been set at 1,8 bar, this is not adjustable. When the...
€22.82
Astoria/Wega brass nut M3
The nut on this page is a M3 nut made from brass. You will find this type of nut on variety of steam and water valves of Astoria and Wega espresso machines. The Astoria part reference for this item is 23050 and the Wega part reference is WY23050.
This brass nut has a metric female thread of M3. The nut has made according to specifications of...
€0.68
Astoria double portafilter
The portafilter on this product page is suitable for a broad selection of Astoria espresso machine models. The Astoria part reference for this item is 27311051 and 8327311051R
This double portafilter has a open spout, this spout has a thread of 3/8” BSP-G. The orientation of the ears is 45 degree. The portafilter does have a ear...
€50.65
Crushable copper washer 1/4" 18x14x2mm
The item on this product page is a crushable copper gasket. This gasket can be used with a variety of espresso machine brands such as Casadio, ECM Heidelberg, La Scala, Cimbali, Faema, Astoria, Nuova Simonelli, Pavoni, Wega and Rancilio.
This crushable copper gasket has a outer diameter of 18mm a inner diameter of 14mm and a thickness of 2mm. This gasket...
€0.95
O ring gasket 6.07x1.78mm Solenoid valve
This o ring is one of the most common parts in the world of espresso machines. The main function of this o ring is to seal off a flanged solenoid valve. Every flanged solenoid valve uses 2 of these. But you will also find them in applications like steam and water valves and water inlet taps.
The o ring has a wire diameter of 1,78mm and a internal...
€0.48
Copper crushable washer 23x17x3mm
On this page you will find a copper gasket, not just a copper gasket but a crushable version. This specific model has an outer diameter of 22mm an internal diameter of 17mm and a height of 3mm.
Copper crushable washers can be used in various pump and boiler related applications. You need to tighten the fitting enough to crush the copper, which makes the...
€1.17