Bezzera Part category

The item on this page is a OEM/Original Bezzera spare part. This is the holder of the touch panel membrane has the part reference 53272701 and 5372701. The holder is in the colour Black. This touch panel membrane holder can be used in combination with the membranes with the Bezzera part references: 5660502, 5660501, 5660504 and 5660503.

This switch can be used on the rocker switch used on various Bezzera espresso machines. This nut can be screwed on the threads of the switch. This switch cover is a OEM/original Bezzera spare part, the part reference is 7372507. This part is made up of 2 sections. The rubber flexible part which moves and a nickel plated nut. This item is made in Italy....

The o ring on this page can be used on various steam and water valves used on San Remo espresso machines. The San Remo part reference number for this o ring is 10402082  This o ring has been made from EPDM. This o ring has a cord diameter of 2,7mm. the inner diameter is 12,1mm. This o ring has been made in Italy. You can use this o ring on the San...

The stainless steel compression spring on this page is used on various Bezzera steam and water valves. The part reference for this Bezzera compression spring is5471504  The compression spring has a outer diameter of 14mm and a height of 10mm. This item can be used on various Bezzera models such as the Bezzera Galatea, Bezzera Ellisse, Bezzera...

The product on this page is a solenoid valve connector, large F fitting. With this connector you can seal off and connect your wiring and solenoid valve to each other. These connectors can be used on all types of standard solenoid valve coils. Where the positive and negative are spaced apart approx. 17mm. This solenoid valve connector can be basically...

On this product page you will find a Bezzera touchpanel membrane suitable for various Bezzera models. You can find this membrane on models such as the Bezzera Ellisse and the Bezzera Ebbis. The Bezzera part reference for this item is 5660502 This touchpad has 5 keys on it. The first one is the programming and continuous key. With this programming key you...

Every espresso machine boiler needs to have their Safety valve changed with fixed intervals to be sure that when the pressure switch/thermostat fails the pressure doesn’t gets too high. So on this page you will be able to find a safety valve, the biggest size used on espresso machines, the ½”BSP. This valve is calibrated from the...

The item on this product page is a OEM/original Bezzera steam and water valve body. The Bezzera part reference number for this item is 5283002LL This valve body is made from casted brass, which has been machined afterwards to make the threads. The valve body has been made in Italy. You can use this valve body on the Bezzera B2000, Bezzera B2000AL,...

It is possible that the flowmeter in your espresso machine starts to leak. On this page you will find a replacement part for most flowmeters. This is the sealing o ring which goes between the flowmeter body and the measuring device. This o ring is suitable for Digmesa and Gicar flowmeters. The cord diameter of this o ring is 1,78mm and the inner diameter...

The Italian solenoid manufacturer ODE is currently the only espresso machine solenoid manufacturer who makes some of their solenoid from the Techno polymer PPS. On this page you see a 3 way solenoid valve made from PPS with the part number 31APBA1R15-13T0 As mentioned before this is a 3 way solenoid valve with a flange. This flange mates against a other...

The heating element on this page is slightly different than a standard boiler heating element. This specific model is used to keep the brewing group at a certain temperature. This will result in better temperature stability of the water flowing true the brewing group. This item is a OEM/original spare part and the Bezzera part reference number is...

The rotary vane pump on this page is slightly different then a normal rotary vane pump. This specific model is made by Procon in Ireland. (CO1309BF and 131A060F123B) with a NSF certification The model pump is a clamp on rotary vane pump. The flanges of the pump and motor are pushed against each other and a stainless steel clamp is placed over it and...