C

This gasket is again such a standard type of gasket in the world of espresso coffee machines. It is the EPDM gasket 15.5x7.5x4mm. This gasket is used a variety of applications on espresso machines. Offcourse on the Faema E61 brewing group as well for the E61 style brewing group, as the camme shaft gasket. By brands like Isomac, Bezzera, ECM, Brasilia,...

The shower screen on this page can only be used on various Conti espresso machines.  This shower screen has been made by the Italian company IMS Filtri, the part reference for this item is CODR179. The Conti part reference for this item is 355900. This shower screen has been made from stainless steel. The outer diameter of this shower screen is 57mm...

The item on this page is a gasket holder for various espresso machine brands, such as Vibiemme and Faema. The part reference for this item is for Faema 4151018538 and for Vibiemme RACCPOGVAESE, This brass gasket holder has a outer diameter of 17mm/8,6mm and a internal diameter of 6mm. the height is approx. 9 and 6mm. this item has been made in...

The item on this product page is a OEM/Original Nuova Simonelli and Victoria Arduino spare part. The Nuova Simonelli part reference for this item is 07300110, this reference number is identical for Victoria Arduino. This brass fitting is a combination between a coupling and a spring holder. The thread used on this item is a 3/8” BSP-G thread. This...

On this product page you will find a steam and water valve knob which can be used on a variety of Conti espresso machine models. The Conti part reference of this item is 4081561. This steam and wate valve knob can be used on for instance the Conti Club. This steam and water valve knob has a hole for a D shaped pin dia 6x8mm. Tis steam and water valve...

On this product page you will find a steam and water valve assembly for the Conti Sacome espresso machines. The part references for this item is 4095901 and 4095903. This casted brass steam and water valve has been made in Italy. The in and outlet of this valve are both 3/8” BSP-G threads. You can use this valve on the Conti Sacome espresso...

On this page you will find a boiler safety valve 3/8” male with a present of 1,8 bar. This safety valve is, at own responsibility, adjustable. This can be done by tightening or untightening the Allan key slot in the top of the valve. Inside this safety valve has a stainless steel spring inside, the sealing material is FKM. This is a non certified...

This 3 way solenoid valve is one of the most commonly found solenoid valves. The part is produced by Parker in Italy. This valve is mainly used as a brewing group solenoid valve. The remaining water from the group comes out of the outlet at the top. The Parker part numbers for this item are 393107J and 393112J This solenoid valve is a 3 way valve. The...

The item on this product page is one of the smaller sizes of o rings. This o ring can be used with various brands such as La Spaziale, La Scala, Carimali, Gaggia and La Pavoni. This o ring has been made from the gasket material FKM. The cord diameter of this o ring is 1,78mm and the internal diameter is 3,69mm. This o ring has been made in Italy. You...

In some cases, the shower screen is attached with a screw, in most cases that is a Philips or a slotted screw. It is difficult to remove it with a regular screwdriver due to the limited height under the brew group.  But for that you need a shortened slotted screwdriver, in this case the one from the German brand Wera, which fits well under the brewing...

The drain valve is responsible for draining the last water out of the E61 style brewing group. This espresso machine part is made up out of 4 parts. The gasket holder, the gasket, small brass washer and a triangular valve rod. The total length of this part is 27mm. This drain valve used in a variety of espresso machine brands like: Expobar CTAV1-05,...

Conti portafilter double spout Return to the portafilter  overview