Filter by
Categories
Price
Filter

Rancilio - Steam/water valve

The Rancilio brand has had a variety of steam and water valves true the time. Seen there have been a variety of espresso machines, commercially and domestically. The Rancilio brand had also steam valves like the C-lever and the I steam.

The steam valves on the Domestic espresso machines, like the Rancilio Silvia, Rancilio Nancy, Rancilio Aundrey and the Rancilio Fantasy. Are slightly smaller and compacter then their commercial counterparts.

The   steam and water valves used on the commercial machines where quite standard, they are just turn knob valves. And are used on models such as the Rancilio Epoca, Rancilio Classe 10, Rancilio Classe 6, Rancilio S20 and the Rancilio Z11.

There is also a more modern version of the steam valve, this is their C-lever principle. And that valve has a dosing handle for steam which you can move up or down. That valve can be found on espresso machines such as the Rancilio Classe 10, Rancilio Classe 11 and the Rancilio Epoca.

Rancilio espresso machine parts - steam and water valve

Steamtube anti scorch clip

The steam tube grip on this page is suitable for steam tubes of 10mm in diameter. If you click this steam tube around your stainless steel or chrome plated steam tube you will never have the issue of burning your hands on the tube. This rubber grip has part references to Brasilia espresso machines 11972.0.00.02 and San Remo espresso machines with...
€1.92

Rubber flat gasket 13x4mm

This blind gasket is used with Rancilio espresso machines to seal off the steam valves. The Rancilio part number for this item is 36301105. The blind gasket on this page has a outer diameter of 13 mm and a thickness off of 4mm. The models which use this specific spare part are the Rancilio Classe 10, Rancilio Classe 9, Rancilio Classe 8, Rancilio...
€2.32

Chromed steam stem 4 holes dia 1,5mm

After a while you do need to replace your steam nozzle, this can be because of various reasons. This specific model is made from brass and then chrome plated. The interior thread, which threads onto the wand, is a 1/8”BSP-G. The steam nozzle has 4 holes each of 1,5mm in diameter. To make it easier to clean this steam tip, they have made a flat...
€4.16

PTFE gasket 18x9x0.5mm

The item on this page is a flat PTFE gasket suitable for Rancilio steam and water valves. This PTFE gasket is suitable for early steam and water valves as well for the current standard valve and the C-Lever system of Rancilio. The Rancilio part number for this item is 36230001  This PTFE gasket has a outer diameter of 18mm a inner diameter of 9mm...
€1.20

Rancilio water/steam valve rod

The steam and water tab assembly is suitable for various Rancilio espresso machines, mainly the older models. The Rancilio part reference for this item is 10706073. This part is made out of a stainless-steel shaft, brass gasket holder and a gasket, so ready to install. This item has been made in Italy. You can use this item on models such as the...
€14.47

Rancilio steam/water valve stem

The item on this product page is a Rancilio valve fitting. This valve fitting is used on the older models of steam and water valve and on water inlet valves as a shaft fitting. The Rancilio part reference number for this item is 25224001.  This fitting has been made from machined brass. on each side is a male thread. The fitting has been made in...
€7.79

Steam water valve joint o ring 12,1x2,7mm EPDM

The o ring on this page can be used on various steam and water valves used on San Remo espresso machines. The San Remo part reference number for this o ring is 10402082  This o ring has been made from EPDM. This o ring has a cord diameter of 2,7mm. the inner diameter is 12,1mm. This o ring has been made in Italy. You can use this o ring on the San...
€0.89

Rancilio valve axle with gasket holder

The item on this page is a stainless-steel shaft with a gasket holder for a Rancilio steam and water valve. This model is suitable for the C-lever as well for the standard valves. The Rancilio part number for this item is 10060002  This item comes as a whole kit. The shaft, gasket holder and the gasket itself. This item is used in a variety of...
€17.53

Tap joint spring guide

This steam pipe bushing is a important element in the sealing and functioning of a steam and water valve. This bushing is pushed down on one side with a spring, this bushing has on the other side a hollow shape so that the ball of the steam and water valve can slide smoothly over the brass. This brass bushing has multiple dimensions. The external...
€0.96

Rancilio steam and water tab unit

The steam valve assembly on this page is suitable for a variety of Rancilio espresso machines. The Rancilio part reference for this item is 10706044  If you have a leaky steam or water valve, replacing the whole assembly would likely fix your issue. This assembly has been made in Italy. This steam and water valve assembly can only be used on the...
€41.86

Rancilio clever steam valve sleeve LH

This assembly is part of the Rancilio C-lever steam valves. This C-lever mechanism is a original/OEM Rancilio part. The Rancilio part number for this item is 10701240. This mechanism is for the left hand side (LH). This is not suitable for the mechanism on the right hand side (RH) What is the C-lever system? This is mechanism designed and patented by...
€82.93

Rancilio brass washer 13x9x0,5mm

On this page you will find a brass washer for various steam and water valves of Rancilio espresso machines. The Rancilio part reference for this item is 23123003 This brass washer is used on a steam and water valve in between the cap spring. The gasket has a outer diameter of 13mm a inner diameter of 9mm and a thickness of 0,5mm. This brass washer can...
€1.04