Rocket Giotto type V

This nozzle/gigleur is installed primarily in the brewing group on a espresso machine. It has a hole diameter 0,6mm. There are a variety of diameters available. The thread used on the part is a male M6 with a pitch of 0,75mm. The thread pitch can vary between 0,75mm and 1mm keep that in mind. But also the diameter of the nozzle can vary, so expect when...

This camme rod for E61 style espresso machines is slightly different then the one used in the Faema E61. This one has a small guide pin at the end which goes inside the group. On the other side there is a squared off section for the lever arm. This section is 6x6mm. To hold the lever in place there is a M6 thread on the end for some sort of a nut. This...

On this product page you will find a espresso machine expansion valve. This model of expansion valve can be used on various domestic espresso machine manufacturers such as Pavoni and Rocket. For Rocket the part reference is C229900911, the Pavoni part reference is 453212 This expansion valve has been made from brass. The fitting used is a male 1/8”...

This stainless steel compression spring is used in the Faema E61 and E61 style brewing groups. But what does this specific do? Well this is the last compression spring in the brewing group. It is the compression spring in the brewing valve which closes the exhaust valve all the way at the bottom of the E61 brewing group. Besides the E61 group spring it...

The expansion valve on this product page can be used on various Lelit and Rocket espresso machine models. The Rocket part reference is A299905143. This expansion valve has a male thread of 1/8” BSP-G. This expansion valve has a reach of 6-12 bar and can be adjusted. The end hose fitting has a diameter of 7mm. The total length of this valve is 76mm...

This T-shaped fitting on this page can be used on variety of domestic espresso machines. You can use this type of T fitting with brands such as Gaggia, Rocket and Saeco. The Gaggia part reference for this item is 147920300, for Rocket the part reference is C400002827 and for Saeco it is 147920300  This T shaped fitting has been made from plastic and...

The most common location for this to seal off the 3/8” male nut on the top of the Faema E61 and E61 style brewing groups like with Bezzera, Brasilia, Grimac, La Scala, Vibiemme and Wega.But also as a gasket to seal off boiler components with brands like Vibiemme and Grimac, This gasket has been made from the material AFM 34 made by the german company...

The microswitch on this page can be used on a variety of Rocket espresso machines. The matching Rocket part reference for this item is A199905198. This switch has a small push able metal roller, this activates the switch when pushed. The microswitch is a NR7K5 rated up to 10A at 250V. You can use this switch on various Rocket espresso machine models...

The item on this product page is a water drawing tube and is a OEM/Original Rocket spare part. The Rocket part reference for this item is C229900393. This water drawing tube has a length of 91mm and the tube diameter is 6mm. The fitting itself has 2 types of thread. A male 1/8”BSP-G and a ¼” BSP-G This water drawing tube can be used...

On this product page you will find a contact thermostat which is used on a variety of espresso machine brands. You can find this contact thermostat on Bezzera and Rocket espresso machines. The Bezzera part reference is 7434009 and the Rocket part reference is C199901550 This contact thermostat is set at 135°C and is a manual reset model. The contact...

The item on this product page is a OEM/Original Rocket spare part. This item is a boiler safety valve and has the Rocket part reference of A299904998. This boiler safety valve has a male 3/8” BSP-G thread. The opening pressure of this valve has been set at 1,8 bar. The hose end fitting side has a diameter of 7mm. This valve has been made in Italy....

On this page you will find a brewing group spray nozzle. This nozzle is one of the most used spay nozzles used in the world of espresso machines. The nozzle has a outer diameter of 30mm and the male thread, which threads into the brewing group, is M10x1mm. What is the purpose of having a nozzle. Well the spray nozzle is located above the shower screen....