The lid on this page is used on various Anfim coffee grinders. This specific part has the part reference number 216 and is a OEM/original Anfim spare part. You can use this hopper lid on the Anfim Best, Haus and the Haus self. It is used in combination with part number 217.

This soldering fitting is a bicone model, which is different then the regular ones. This specific model is used in combination with 12mm copper tubing and with the dedicated 1/2” BSP nut.

This soldering fitting is a bicone model, which is different then the regular ones. This specific model is used in combination with 10mm copper tubing and with the dedicated 3/8” BSP nut which can hold a 10mm copper tube.

This soldering fitting is a bicone model, which is different then the regular ones. This specific model is used in combination with 8mm copper tubing and with the dedicated 3/8” BSP nut.

This soldering fitting is a bicone model, which is different then the regular ones. This specific model is used in combination with 6mm copper tubing and with the dedicated ¼” BSP nut.

This product is used in combation with the Cimbali/Faema bicone soledering cap. This is a product you will only find on Cimbali espresso machines. The brass nut itself has a female ¼” BSP-G thread. this specific model is only used for 8mm copper, the central hole is 8,4mm. This item is made in Italy.

For espresso machines you have a wide selection of soldering/welding caps. This is also the case for the brands of Gruppo Cimbali. They have a specific welding end cap soldered on their tubing, You can find this welding end cap on brands such as Casadio, Cimbali and Faema. This specific soldering cap is used in combination with 8mm copper tubing. Besides...

The item on this product page is used in the coffee doser on various Compak coffee grinders. This specific item is a adjustment handle. It has the Compak part reference number K.1096. You can find this adjustment knob on coffee grinders such as the K3, K5, K6, K8 and finally the K10. For the complete list of models, check the extra info tab.

The item on this product page is a coffee grinding burr adjustment ring. This specific part has the Compak part reference number K.1108. This specific adjustment ring can be used on various K6 models, such as the the Silenzio and the Barista Professional. As well as on the K8 Silenzio coffee grinders.

A adjustment ring on a coffee grinder is used to adjust the grind settings. By turning the ring you can increase or decrease the distance between the grinding burrs. The Compak part reference number for this item is K.2064. This item can be used on the various Compak K3 coffee grinders, which do have the same part reference number offcourse.

The coffee hopper on this product page is a hopper used on the various versions of the K3 coffee grinder. The Compak part number for this item is K.2028. This coffee hopper is not a complete assembly. It is only the coffee container and the shutter, the coffee hopper lid is not part of this product. This item is made in Spain. You can use this coffee...

The item on this page is a complete coffee hopper for various Compak coffee grinders. This specific item has the part references 526137, K..286 and K01358. This coffee hopper comes as a complete set. The coffee hopper itself, the shutter and the coffee hopper lid. This item has been made in Spain. You can use this coffee hopper on a wide selection of...

This gasket is again such a standard type of gasket in the world of espresso coffee machines. It is the EPDM gasket 15.5x7.5x4mm. This gasket is used a variety of applications on espresso machines. Offcourse on the Faema E61 brewing group as well for the E61 style brewing group, as the camme shaft gasket. By brands like Isomac, Bezzera, ECM, Brasilia,...

The portafilter gasket on this product page can be used with a wide selection of brands. This portafilter gasket can be used on Brasilia, San Remo, la Scala, Bezzera, Faema, Vibiemme and Pavoni espresso machines. This gasket has been made from NBR. The outer diameter is 72,5mm, the inner diameter is 57mm and the thickness is 8mm. This gasket has been made...

Every brewing group uses a portafilter gasket. In this case it is a 73x57x9mm gasket. In this case they are made from a food grade nitrile butadiene rubber(Nbr) The OD and ID of 73x57mm is quite a standard size. You will see this size with brands like Expobar, Vibiemme (VBM), La Scala, Bezzera, Faema and Azkoyen. This doesn’t mean that these brands don’t...

This o ring is one of the most common parts in the world of espresso machines. The main function of this o ring is to seal off a flanged solenoid valve. Every flanged solenoid valve uses 2 of these. But you will also find them in applications like steam and water valves and water inlet taps. The o ring has a wire diameter of 1,78mm and a internal...

The paper gasket is one of the items you rarely find as a OEM or Original Item. But it is one of the most important items to keep your machine functioning. Over time the brewing group and portafilter locking systems wears, so there will be more space then original. This small spaces can be filled with the paper shims. This can fix the problems of not...

The valve gasket on this page can be used on numerous of espresso machine brands such as Vibiemme, Wega, La Scala, Faema, La Pavoni, Brasilia and Grimac. This gasket in mainly used in the steam and water valves as well as in the water inlet valves. But the best example is in the E61(type) of brewing groups. The part reference list can be found in the...