Vibiemme Domobar Junior 2B

The portafilter gasket shown on this page is used with various espresso machines of the Cimbali group and with Vibiemme espresso machines. the part reference numbers can be found in the extra info tab. This portafilter gasket has been made from NBR. The outer diameter is 74mm the inner diameter is 57,5mm and the thickness is 8mm. This gasket has 4...

In some cases, the shower screen is attached with a screw, in most cases that is a Philips or a slotted screw. It is difficult to remove it with a regular screwdriver due to the limited height under the brew group.  But for that you need a shortened slotted screwdriver, in this case the one from the German brand Wera, which fits well under the brewing...

The vibration manufacturer Ulka makes 230V vibration pumps for espresso machines. But they also make 120V vibration pumps for espresso machines. On this page you will find the Ulka EX5 vibration pump. This pump produces 41W with a 120V at 60Hz. The water inlet is a 6mm plastic fitting, the outlet of the pump is 1/8”BSP. The EX5 has a brass outlet...

This steam and water valve knob for your Vibiemme ( MANPRUSC ) Domobar Junior and Domobar Super. The outer dimensions of this knob are 35x35mm. note there is also a type knob available which has the dimensions 43x43mm. so slightly bigger. The internal hole of the steam and water valve knob is a square of 6x6mm. This steam and water tab knob can be used...

On this page you will find a complete water pipe for a Vibiemme espresso machine. Models which use this type of are the Vibiemme Domobar Junior and the Vibiemme domobar Super. This water pipe exists out of 3 components. The water tube itself, the water pipe nozzle and the connecting nut to the valve. The inserts for the water pipe nozzle are generic...

This Vibiemme RACCCASUTEPI chrome plated drain sleeve is unique for e E61 style brewing group. Vibiemme is the only espresso machine manufacturer who uses this principle. This is being used for the Lever as well for the Solenoid brewing group. Instead of the screw in drain sleeve, as being used by brands like Faema, Bezzera, La Pavoni, La Scala and...

This gasket has been made from the fibre material AFM 34 in Germany. This gasket has a outer diameter of 26mm a inner of 21 and a thickness of 2mm. This gasket is used in a variety of components throughout a espresso machine. The most common place where this coffee machine gasket is used, is in the Faema E61, Faema E61 legend and E61 style brewing groups....

The steam wand on this page is for a Vibiemme(TUBILADOMSU ) Domobar espresso machine. The developed length of the tube is 260mm. the tube itself has a diameter of 8mm. The tube comes with a steam tip with 2 holes and the steam pipe nut to connect the steam tube to the steam valve of the Vibiemme Domobar. If you are not sure if the steam tube is suitable...

This stainless steel cam lock prevents you from turning the camme shaft on the E61 and E61 style group too far. It has a male M6 thread on one side, the other side has a slit to screw the part in the Brewing group with a flat head screwdriver. This coffee machine parts is being used with a variety of brands like: Bezzera 7479951, Brasilia 13651.0.40.04,...

This stainless steel spring 14x33mm is used in a variety of locations in a espresso machine. The most common location for this compression spring is in a Faema E61 brewing group of a E61 style brewing group. The spring seats inside the top trumpet and makes sure that the top brewing valve closes when the brewing process is stopped, and the lever has...

This nozzle/gigleur is installed primarily in the brewing group on a espresso machine. It has a hole diameter 0,6mm. There are a variety of diameters available. The thread used on the part is a male M6 with a pitch of 0,75mm. The thread pitch can vary between 0,75mm and 1mm keep that in mind. But also the diameter of the nozzle can vary, so expect when...

On this page you will find one of the most used espresso machine pumps. The Ulka Ex5 48W 230V espresso machine vibration pump. This pump produces 48W at 230V with 50Hz. The inlet connection is 6mm, suitable for a silicone hose. The pump outlet is a 1/8” Bsp, this side is made from brass. There is also a Identical pump the Ulka EP5, this one has a...