Vibiemme Replica solenoid group

The portafilter on this product page is a bottomless portafilter which can be used on a variety of Vibiemme brewing groups. This is the case for the commercial and the domestic espresso machine models. This portafilter has no spout, but a bottom which has been cut out. The ear orientation is 90 degree and the thickness of the ears is 5,5mm. The...

The gasket on this page is a Polytetrafluoroethylene (PTFE) gasket with the dimensions 35x30x2mm. This specific gasket is used on 3 specific places on the E61 style brewing group (the Faema E61 and Faema E61 legend group use a different size of ptfe gasket). It is used to seal off the top trumpet or drain sleeve, on the side of the group the camme holder...

The portafilter on this product page is a OEM/Original Vibiemme spare part. The Vibiemme part reference for this double portafilter is ASPORTN2TAMON. This portafilter has a closed double spout, this cover can be removed for cleaning. The ear orientation on this portafilter is 90 degree. The thickness of the ears is 5,5mm. This portafilter does come with a...

On this product page you will find a parker 3 way solenoid valve which is slightly different then a conventional solenoid valve. This solenoid valve is mainly used on solenoid brewing groups of the brand Vibiemme. What makes it so different? This solenoid valve is pre-wired. The Parker part numbers of this item are 393134J and 393395J This solenoid valve...

This nozzle/gigleur is installed primarily in the brewing group on a espresso machine. It has a hole diameter 0,6mm. There are a variety of diameters available. The thread used on the part is a male M6 with a pitch of 0,75mm. The thread pitch can vary between 0,75mm and 1mm keep that in mind. But also the diameter of the nozzle can vary, so expect when...

On the top of a Faema E61 brewing group or a E61 brewing group is always the final item. That’s a chrome plated 3/8” male plug. Nothing else nor something special. This is generic part which can also be used in a variety of situations then a E61 brewing group, but also on different locations on a espresso machine. Like on the boiler with a...

On this page you will find a portafilter gasket suitable for a variety of brands such as Faema, San Remo, Cimbali, Vibiemme, La Scala, Bezzera, Pavoni and Isomac. This portafilter gasket has been made from NBR. The outer diameter is 73mm the inner diameter is 57mm and the thickness of this gasket is 8mm. This gasket has been made in Italy. You can use...

The function of a shower screen is to spread the water coming out off the group on a equal way over the coffee. One of the standardized sizes and most common, is the 60mm shower screen. This shower is a pressed model made by IMS IMSDR300. The outer diameter is 60mm, the internal height is 17mm and the diameter of the punctured holes is 2,5mm Note: this is...

The 2 coffee filterbasket on this page can be used a big variety of espresso machine brands. You can use this basket on brands such as Casadio, Brugnetti, ECM Heidelberg, San Remo, Faema, Vibiemme, La Scala, Grimnac. This filterbasket has been made by the Italian company IMS Filtri. The IMS part reference is CF2T068. Note: this is not a competition...

The portafilter gasket shown on this page is used with various espresso machines of the Cimbali group and with Vibiemme espresso machines. the part reference numbers can be found in the extra info tab. This portafilter gasket has been made from NBR. The outer diameter is 74mm the inner diameter is 57,5mm and the thickness is 8mm. This gasket has 4...

This flat Polytetrafluoroethylene (PTFE) gasket 25.5x21x5mm is used on Vibiemme (GUARCASUTEPI) espresso machine brewing groups. As well in the manual lever brewing group as well for the solenoid group. This part seals off the bottom off the upper sleeve in the brewing group. If you are not sure if this item will fit your Vibiemme Domobar, Vibiemme Replica...

This Vibiemme RACCCASUTEPI chrome plated drain sleeve is unique for e E61 style brewing group. Vibiemme is the only espresso machine manufacturer who uses this principle. This is being used for the Lever as well for the Solenoid brewing group. Instead of the screw in drain sleeve, as being used by brands like Faema, Bezzera, La Pavoni, La Scala and...