Wega - water inlet 02

This is maybe one of the most universal gaskets around. The gasket for the male 3/8” BSP-G fitting. You can use this fitting on water inlet valves, boilers, safety valves, anti vacuum valves. This copper gasket is a compression version, so it will form slightly around the surfaces it is mating. The outer diameter is 22,8mm, the inner diameter is 17mm and...

The expansion valve gasket shown on this page is a generic item. You can find it in the catalogue of a variety of espresso machine manufacturers. The gasket is a flat NBR gasket with a pin at the end. The widest section of the gasket has a diameter of 15mm and the pin has a diameter of 6mm. The total height for the gasket is 10mm. Which espresso machine...

The non return valve is a key components in a espresso machine. This prevents that water doesn’t flow to places it isn’t intended to do so. This specific spring is used on a variety of espresso machines like Brasilia, Faema, Grimac, La Spaziale, Vibiemme and La Carimali. The spring has a external diameter of 8mm and a overall length of 30mm....

The item on this page is a gasket holder for various espresso machine brands, such as Vibiemme and Faema. The part reference for this item is for Faema 4151018538 and for Vibiemme RACCPOGVAESE, This brass gasket holder has a outer diameter of 17mm/8,6mm and a internal diameter of 6mm. the height is approx. 9 and 6mm. this item has been made in...

Every valve needs to have return spring to close again. On this page you will find the return spring used in the Faema E61 steam and water valve. As well in their successors used in Vibiemme, Grimac and la Scala machines. This spring is made out of stainless steel and has an external diameter of 12,5mm and a length of 30mm. So, steam and water valves...

One of the most universal items. The male brass plug. The plus on this page can be found in the catalogue of a variety of espresso machine manufacturers like Astoria, Faema, La Spaziale and Wega. This specific plug has a male ¼”BSP-G thread. The height of this plug is 13 mm and the wrench size for this plug is 17mm.

The flat copper gasket on this product page can be used with a variety of espresso machines and on various applications. You can use this copper gasket on espresso machines such as Marzocco, Casadio, ECM Heidelberg, La Scala, La Cimbali, Faema, Astoria, Wega, Nuova Simonelli, Wega and Rancilio. You will mainly see the use of this copper gasket to seal...

Brass fittings used on espresso machines are generic items, seen they are used in quite a lot of coffee machines. This specific model is a nut with a 3/8” BSP-G thread with a height of 6mm. The wrench size used for this item is a 21. Which models use this 3/8” BSP-G nut.? Well you can find this nut with brands like: Gaggia, Saeco, Victoria Arduino,...

On this page you will find a 2 way solenoid valve made by the company Parker.  This specific Parker 2 way solenoid valve is used with various brands as a water inlet valve for filling the boiler.  The Parker parts number for this item is 393233J This 2 way solenoid valve is one of the types which has a flange model, this model is sealed with...

Faema E61 small non return valve

This O ring in nbr with the specifications 8,9x1,9mm. Makes sure that the brass non return valve seals against the body of the non return valve. Return to the Faema E61 valve parts overview

The expansion and non-return valve on this page is one of the most standardized items used in espresso machines manufactured by the Astoria CMA company. The Astoria part reference is 20361 and of the Wega the part reference is WY20361  This non return and expansion valve has 1 inlet and 2 outlets. The inlet is a male ¼” BSP-G, the exhaust outlet is a ¼”...