Filter by
Categories
Price
Manufacturers
Type part
more... less
Brand
more... less
Filter

Brewing group

On this overview page you will find basically all the parts you are going to need for your espresso machine brewing group. The most well known brewing group around is the E61 lever brewing group, which originates from the Faema E61 espresso machine. It has its origin with Faema, but there are a lot of differences between the brands they use. You can find this type of brewing group can be found on brands such as San Remo, ECM Heidelberg,Vibiemme, Bezzera, Wega, Grimac, La Scala and Brasilia.

On this page you will find the standard general maintenance parts like the portafilter gaskets, shower screensbrewing group gaskets and brewing group filter mesh. But also items which don’t get replaced that often like solenoid valves, springs, microswitches, heat exchangers and diffusers plates.

In every category you can search, with the help of the filter, for the espresso machine brand you need replacement parts for. If you can’t find the part your looking for don’t hesitate to contact us.

Espresso machine brewing group parts

Astoria Wega portafilter gasket 72x56x8mm

The portafilter gasket on this page is a alternative to the original portafilter gaskets made by the Astoria CMA group. The design of this portafilter gasket is similar to the original and is also made in Italy. The corresponding Astoria part number is 12217  and the one of Wega is WY12217  The outer diameter of this portafilter gasket is 72mm,...
€2.92

Bezzera solenoid valve drain fitting

The item on this page is a Bezzera solenoid valve discharge fitting and tube. This spare part is a OEM/original Bezzera spare part and has the part reference numbers 5194559, 5194559LL, 5194560LL and 5370313.  The fitting is screwed on the bottom of the solenoid valve where the exhaust port is located. The threads are a female 1/8”. Over the fitting you...
€8.21

La San Marco shower holder 5mm

The shower holder diffuser on this page is a OEM/Original La San Marco spare part. The San Marco part reference for this item is 206823  The shower diffuser plate on this page has an outer diameter of 54mm and a height of 12mm. The central hole is 5mm. This original La San Marco shower holder diffuser plate is used on the La San Marco 105.
€34.23

La Cimbali HX o ring viton 50.8x3.53mm

The o ring on this page is a green Viton o ring used in the most commonly used La Cimbali Brewing group. This gasket makes on multiple locations a seal between the 150mm/210mm HX tube and the brewing group head and the HX and the boiler flange. There are multiple Cimbali part numbers such as 401178002, 401-178-002, 401178012 and 401-178-012. This o ring...
€3.34

Portafilter gasket 73x57x9mm red silicone

The portafilter gasket shown on this product page is one of the most common sizes found on commercial espresso machines. But this gasket hasn’t been made from NBR as traditionally done, but from food grade silicone. You can find this portafilter gasket on brands such as Faema, Vibiemme, Bezzera and La Scala. This red silicone gasket has a outer diameter...
€4.52

Cimbali/Casadio/Faema gigleur 0,8mm

the item on this a brewing group gigleur, which are used on various Casadio, Cimbali and Faema espresso machines. The Casadio part reference number is 903997000, the Cimbali part reference number is 903-997-000 and the Faema part reference number is 903-997-000. This gigleur is used on the Cimbali and Faema espresso machines on the water inlet, with the...
€56.14

E61 style upper sleeve

The chrome plated upper sleeve can be used with a wide selection of E61 style brewing groups. You can use this item with various brands such as Brasilia, Wega, Faema, Grimac, Bezzera, la Scala and Royal. This upper sleeve has been made from machined brass. This has been polished, to get the mirror finish. After that it has been nickel and chrome plated....
€64.57

PTFE gasket 35x30x2mm

The gasket on this page is a Polytetrafluoroethylene (PTFE) gasket with the dimensions 35x30x2mm. This specific gasket is used on 3 specific places on the E61 style brewing group (the Faema E61 and Faema E61 legend group use a different size of ptfe gasket). It is used to seal off the top trumpet or drain sleeve, on the side of the group the camme holder...
€1.17

Victoria Arduino/Nuova Simonelli shower holder diffuser

The shower screen holder on this product page is a OEM/Original Nuova Simonelli and Victoria Arduino Spare part. The part references for this item are for Nuova Simonelli 07300183.N and for Victoria Arduino 07300183.N. This shower screen holder has been made from machined brass and then provided with a nanotech coating. The outer diameter of this...
€44.39

La Cimbali gigleur 0.5mm

The nozzle/gigleur is used on a couple of Cimbali brewing groups. This nozzle is not located inside the brewing group, as you see with most gigleurs. But it is installed inside the tubing at the flowmeter or close to the brewing group. This item has multiple part numbers you will find those at the extra info tab. This gigleur has a outer diameter of 14mm...
€11.69

PTFE flat gasket 53x43x3mm

The item on this page is a PTFE heating element gasket, which is used on various espresso machine brands such as Casadio, San Remo, Vibiemme, Grimac , Brasilia and Astoria. The part reference numbers for this heating element gasket can be found in the extra info tab. As mentioned before this gasket has been made from PTFE. The outer diameter is 53mm, the...
€2.06