Filter by
Manufacturers
Type part
more... less
Type
Price
Filter

Frequently Asked Questions

Well that answer is pretty simple, no it isn’t. The original valve works as following, when you turn the shaft inwards the valve pin will push a gasket holder. The steam can go out, close it again and no steam can go out. In the case of the modern E61 valves is that behind the gasket holder is a small stainless steel ball with a spring.

From the beginning of the Faema E61 brewing group are basically no differences between the parts installed inside the brewing group. Parts such as the valve gaskets, springs, valve assemblies and portafilters have all remained the same. The biggest change is the small cleaning hole on the front of the brewing group. With the earliest models this hole didn´t exist.

There are 5 types of boiler used on the Faema E61 espresso machine. The most well known is the double flanged model. You have on one side the heating element flange and on the other side the water level flange, both are out of production. These are held in place with aluminium boiler rings. For the single groups you have a boiler with a flange on one side.

The next model is a stainless steel boiler, with one flange. This type of boiler is less common then the copper boiler above. There is also a later model stainless steel, which doesn’t have a removable flange. Both these boilers have corrosion issues, this has to do because of the stainless steel.

The latest model is also a copper boiler, this boiler has a single heat exchanger(HX) in the middle. Most modern espresso machines have for each individual brewing group a individual HX.

Yes it is, but this depends on various factors. The first thing is experience, seen this is a manual operated espresso machine it requires a lot more attention from the barista then a solenoid operated model. There you need to stop the brewing process manually. If you don’t have the experience you probably can’t hold up with the tempo which is required at such a bar. Then I would advice to go for the Faema E61 Jubilee, this is the solenoid operated version of the Faema E61 Legend espresso machine.

Faema E61 espresso machine parts

The Faema E61 espresso machine, maybe the most iconic espresso machine every build. The Faema E61 espresso machine is a revolutionary espresso machine with a timeless design. Technically, this machine was a game changer in the espresso machine market. From then on, the espresso was brewed in the E61 brew group with a constant pump pressure of 9 bar. Instead of using a more laborious lever espresso machine. The Faema E61 group head, or e61 style group, has become the basis for many espresso machine manufacturers.

Brooks | Faema E61 espresso machine parts

Ffilterbasket 2 coffee 14gr 70x24,5mm

The 2 coffee filterbasket on this page can be used a big variety of espresso machine brands. You can use this basket on brands such as Brasilia, Elektra, Victoria Arduino, Faema, Cimbali, Casadio, La Scala. This filterbasket has been made by the Italian company IMS Filtri. The IMS part reference is CF2T069. Note: this is not a competition...
€4.54

Faema E61 group spout breaker

The fitting on this product page is the last fitting on various E61 style of brewing groups. The drain fitting. This item can be used on various brands which use the E61 group, such as Faema, Grimac, La Pavoni, Rocket and Wega. This drain fitting has been made from machined brass. Which has been polished, nickel and chrome plated. The thread on one side...
€7.42

Portafilter gasket 73x57x8,5mm

The portafilter gasket on this page is used on various Wega espresso machine models. The Wega part reference for this item is WY12228. This portafilter gasket has been made from NBR. This gasket has a outer diameter of 73mm a inner diameter of 57mm and a thickness of 8,5mm. There are on the inside 3 cuts. This gasket has been made in Italy. You can use...
€3.13

Faema E61 aluminium filling lever

We where unable to trace down original or reproduction lever handles for the Faema E61 boiler filling valve. So we decided to have them casted ourselves. Seen the alternative would be a plastic handle which didn’t look like at all. We had made a casting mould and have a limited amount made of this Faema E61 aluminium filling handles. You will...
€46.61

IMS single cup filter basket 7/9 gr

The filterbasket on this page is one of the most commonly found filter basket models. This model is made by IMS Filtri in Italy. The basket is from the competition line and not the standard line. The single filterbasket on this page has the IMS product code B701TH26.5E This single filterbasket can hold ground coffee from 7 grams up to 9grams. The basket...
€21.77

Faema E61 inox filter 10.5x0.3mm

This wire filter is used in a variety of Faema E61 brewing groups, such as the classical E61 but also the more modern E61 Jubilee and the E61 Legend. This filter has the Faema part reference number 4771135894 This filter is made from stainless steel. The outer diameter is 10,5mm and the thickness is 0,3mm. This item is made in Italy.
€1.32

Cafelat red silicone portafilter gasket 73x57x8mm

This size of portafilter gasket is the most common portafilter gasket you will find. This size can be used on the e61 style of brewing groups. You can use them on brands such as Faema, San Remo, Vibiemme , ECM, La Pavoni, Wega, Rocket and so on. This gasket is made by the HongKong based company Cafelat. This gasket is made from food graded red silicone....
€4.36

Faema E61 and President 2 group glass

It is not uncommon that the back lid glass of your Faema E61 or Faema President breaks. Glass remains fragile in the end. On this page you will find a replacement glass for the 2 group espresso machine. The get rid of the sharp edge the glass has been cut with a small chamfer. This glass plate comes without a stickers. We do only have the stickers for...
€258.26

Anti vacuum valve V.A.R. 1/4"

On this product page you will find a anti vacuum valve. This valve is made completely out of brass and can be easily disassembled. This type of anti vacuum valve is used with quite a lot of espresso machine brands. This valve has a male ¼”BSP-G thread. The o ring inside the valve is made from HNBR, but the o ring end stop is made from PTFE. As mentioned...
€8.70

Faema E61 boiler gasket 12 holes 245x205x2mm

The boiler gasket on this page can be used on various older Faema espresso machines. The most famous of them is the Faema E61. This boiler gasket is used in combination with the boilers with the aluminium boiler flanges. This gasket has a outer diameter of 245mm a inner diameter of 205mm and a thickness of 2mm. This gasket has 2 side which have been...
€24.19

Faema E61 history

The Faema e61 was the first successfully semi automatic espresso machine which was operated with the help of a pump. Prior to this the pressure in the brewing group came from compressing the springs inside the brewing group, which exerted about 9 bars of pressure on average. The idea is that the 9 bar also comes from this average.

Faema E61 parts

Seen the Faema E61 is a older type of espresso machine you will also find less electronics, but more mechanical parts. Which means also more maintenance over time, but the advantage is that normally mechanical parts such as gaskets, springs and valve parts are relatively inexpensive. Especially when you compare it to electrical components

E61 portafilter

The portafilters used on the Faema e61 brewing group have become one of the most common sizes of portafilters used on espresso machines. The Faema E61 portafilter for the vintage Faema E61 espresso machine has a unique handle design, which you can also find with the modern Faema E61 espresso machines. But in the past they where made from black Bakelite, nowadays they are made from black nylon.

E61 brewing group

The standard espresso machine brewing group, e61 style, originates from the Faema E61 brewing group. In it’s time this was one of the most revolutionary brewing groups ever made on a espresso machine. With it’s various springs, gaskets and valve holders.

Keep in mind that the “original” e61 brewing group has a lot of similar components with the e61 style brewing groups. But there are a variety of small and bigger components which are not interchangeable.

 

New Faema e61 models

The Faema E61 has been in production for a while, but at some point in history the production of this iconic espresso machine stopped. But around the turn of the century this iconic design was technically modernized. They made a version which is closest to the original, the e61 legend. There has been made also a modernized one which is volumetric, that is the E61 Jubilee.

Faema E61 legend

The Faema E61 Legend espresso machine is the manual version of the modern E61 series of Faema. This espresso machine is technically very similar to the original. But has been fitted with various new safety features such as a thermostat. But also the internal pump(not in all cases) is new. A other handy feature is the autofill system. Which makes sure that there is always plenty enough water inside the boiler. The Faema E61 Legend is made in a S1, S2 and S3 version, so the amount of brewing groups

Faema E61 jubilee

This one is the volumetric version of the classical Faema E61 espresso machine. This means that the brewing group used on this coffee machine does not have the valve mechanism, but it is solenoid operated. This can be done with a push on a button of the coffee selection panel on the front of the espresso machine. So the design will be slightly different then The Faema E61 Jubilee is made in a S1 and a S2 version.