Faema E92 Elite - Motor and pump

This Nuert pump is one of the few espresso machine pumps made in stainless steel. The majority of all the pumps are still made from low lead brass. This specific pump is designated as a “Compact Plus “pump and has the part number PRM15FZXN_EGND. This pump is specially made for the espresso machines models made by the La Cimbali group. There...

To connect a flange pump and flange motor to each other you need to have 2 coupling plates and a rubber middle coupler which connects the coupling plates to eachother. This rubber motor pump coupling is universal and can be used with the metal coupling plates with a rounded off shaft and with the slitted pump coupling connection. These type of couplings...

On this page you will find a clamp on rotation pump. This specific model Compact Plus (MO0154EAADN) has been made by the Italian company Fluid o tech in Italy. This type of coupling is only used with a couple of coffee machine brands, which are all part of the La Cimbali Group. So, you will find them with the espresso machines Casadio, La Cimbali and...

The o ring on this product page is used on various Brasilia steam and water valves on various models. The Brasilia part references for this item are 05825.0.00.02 and 0582500002. This o ring is made from EPDM. The cord diameter is 2,62mm and the internal diameter is 25,07mm. This o ring is made in Italy.  You can use this o ring on the...

On this page you will find a Nuert rotation flange pump. This model type can only be used on espresso machines made by the La Cimbali group. This specific model of rotation pump is called the “Compact Plus” with part number PRM15FZ1N_EGND. The pump in question is a flange pump. This pump is attached the espresso machine motor with 2...

On this page you will find a motor mainly used for older model espresso machines from Faema like: Faema Due, Faema E91, Faema E92, Faema Star and Faema Tronic. This motor is build by the Italian company Elettromeccanica ing. F. Arduini. This is a 170W pump motor which runs on 220V with 50/60hz. To start the motor you need a start capacitor, on this...

The rotation pump on this page is from the bolt on type. The specific model is made by the pump manufacturer Procon and it is made in Ireland. The pump is NSF certified and has the Procon part number 132E060F114B150 This specific pump type has a slightly different flange then most Procon pumps used on espresso machines. This type is a bolt on flange, and...

With Faema and La Cimbali flange pumps there is a additional coupling between the flanged motor and the flanged pump. This coupling is made of 2 metal couplings. 1 connects to the espresso machine motor shaft, the other connects to the pump. Note: this coupling has a round shaft opening with a flat side. The metal connectors have a OD of 40mm. In between...

This Fluid o tech rotation pump is a more uncommon version in the world of espresso machines and only used by a selection of brands. The part is designated as a “standard” pump and the part number for this pump is PO0204FNADN0000. This pump has a NSF approval. The espresso machine pump on this page has a flowrate of 200 L/H and is equipped...

The item on this page is a valve for a non return valve. This item is used with a variety of espresso machine made by the Cimbali group. You can find this item on Casadio, Cimbali and Faema espresso machines. The item references can be found in the extra info ta. This casted non return valve holder is used in combination with a o ring. The model of o...