Filter by
Type part

Faema Enova - Motor and pump

Faema Enova espresso machine parts motor and pump

Faema Enova - Motor and pump

O ring 25,07x2,62mm EPDM

The o ring on this product page is used on various Brasilia steam and water valves on various models. The Brasilia part references for this item are 05825.0.00.02 and 0582500002. This o ring is made from EPDM. The cord diameter is 2,62mm and the internal diameter is 25,07mm. This o ring is made in Italy.  You can use this o ring on the...

Faema pump motor Due E91 diplomat 170W 220V

On this page you will find a motor mainly used for older model espresso machines from Faema like: Faema Due, Faema E91, Faema E92, Faema Star and Faema Tronic. This motor is build by the Italian company Elettromeccanica ing. F. Arduini. This is a 170W pump motor which runs on 220V with 50/60hz. To start the motor you need a start capacitor, on this...

Ducati Energia capacitor 10μF 450V

The capacitor on this page is a 10µF model. This model is manufactured by the Italian company Ducati Energia. The part reference for this item is 41610.1564. This capacitor is used as a start capacitor for pump motors and as a start motor for the coffee grinder motor. This capacitor can be found with brands such as Casadio, Carimali, Vibiemme, Cimbali,...

Nuert flange pump 150 L/H compact

On this page you will find a Nuert rotation flange pump. This model type can only be used on espresso machines made by the La Cimbali group. This specific model of rotation pump is called the “Compact Plus” with part number PRM15FZ1N_EGND. The pump in question is a flange pump. This pump is attached the espresso machine motor with 2...

Ducati energia 5µF capacitor

The item on this product page is a capacitor made by the Italian company Ducati Energia. This capacitor can be used on various coffee grinder models of Eureka and Nuova Simonelli. The part reference number for Eureka is 1013.0005. The Ducati part reference is 41610.0864 This capacitor produces 5µF at 450V 50/60Hz. The operating ranges go from -25 degree C...

Cimbali/Faema rotary vane pump 180L/H original

The pump on this page is a OEM/Original Cimbali/Faema rotation pump. But this pump is slightly different, most pumps are made from casted brass but these are made from stainless steel. This pump has been made by the Italian company Fluid o tech. The part references for this pump can be found in the extra info tab. This pump has the name Compact plus and...

Pump water filter 3/8" MM

The part on this product page is a brass water filter. This filter is screwed into the espresso machine water pump. You can find this type of filter with various espresso machine brands such as Brasilia, Carimali, Casadio, Cimbali and Faema. This brass water filter has a male in and outlet, these threads are 3/8” BSP-G. Inside this brass housing is...

Faema rubber pump-motor connector 40 mm

To connect a flange pump and flange motor to each other you need to have 2 coupling plates and a rubber middle coupler which connects the coupling plates to eachother. This rubber motor pump coupling is universal and can be used with the metal coupling plates with a rounded off shaft and with the slitted pump coupling connection. These type of couplings...

Fluid o tech flange pump 200 L/h

This Fluid o tech rotation pump is a more uncommon version in the world of espresso machines and only used by a selection of brands. The part is designated as a “standard” pump and the part number for this pump is PO0204FNADN0000. This pump has a NSF approval. The espresso machine pump on this page has a flowrate of 200 L/H and is equipped...

Fluid o tech flange pump 150 L/H

On this page you will find a clamp on rotation pump. This specific model Compact Plus (MO0154EAADN) has been made by the Italian company Fluid o tech in Italy. This type of coupling is only used with a couple of coffee machine brands, which are all part of the La Cimbali Group. So, you will find them with the espresso machines Casadio, La Cimbali and...

Procon flange pump 180 L/H 3 holes

The rotation pump on this page is from the bolt on type. The specific model is made by the pump manufacturer Procon and it is made in Ireland. The pump is NSF certified and has the Procon part number 132E060F114B150 This specific pump type has a slightly different flange then most Procon pumps used on espresso machines. This type is a bolt on flange, and...

Nuert Flange pump Stainless steel 180 L /H

This Nuert pump is one of the few espresso machine pumps made in stainless steel. The majority of all the pumps are still made from low lead brass. This specific pump is designated as a “Compact Plus “pump and has the part number PRM15FZXN_EGND. This pump is specially made for the espresso machines models made by the La Cimbali group. There...