Vibiemme - Brewing group
The function of a shower screen is to spread the water coming out off the group on a equal way over the coffee. One of the standardized sizes and most common, is the 60mm shower screen. This shower is a pressed model made by IMS IMSDR300. The outer diameter is 60mm, the internal height is 17mm and the diameter of the punctured holes is 2,5mm
Note: this is...
€4.02
AFM 34 gasket 26x21x2mm
This gasket has been made from the fibre material AFM 34 in Germany. This gasket has a outer diameter of 26mm a inner of 21 and a thickness of 2mm. This gasket is used in a variety of components throughout a espresso machine. The most common place where this coffee machine gasket is used, is in the Faema E61, Faema E61 legend and E61 style brewing groups....
€1.03
E61 style camme rod
This camme rod for E61 style espresso machines is slightly different then the one used in the Faema E61. This one has a small guide pin at the end which goes inside the group. On the other side there is a squared off section for the lever arm. This section is 6x6mm. To hold the lever in place there is a M6 thread on the end for some sort of a nut.
This...
€16.14
Faema E61 group upper plug
On the top of a Faema E61 brewing group or a E61 brewing group is always the final item. That’s a chrome plated 3/8” male plug. Nothing else nor something special.
This is generic part which can also be used in a variety of situations then a E61 brewing group, but also on different locations on a espresso machine. Like on the boiler with a...
€4.10
Faema E61 camme spring 15x25mm
This stainless steel compression spring with the dimensions of 15x25mm is normally used as a camme spring on a Faema E61 brewing group or on E61 style brewing groups. Like with the Faema E61, Faema E61 legend, Grimac, Isomac, Pavoni, Wega and a variety of other brands which use a e61 style of brewing group.
Besides that option, this model...
€1.21
Portafilter gasket 73x57x9mm
Every brewing group uses a portafilter gasket. In this case it is a 73x57x9mm gasket. In this case they are made from a food grade nitrile butadiene rubber(Nbr)
The OD and ID of 73x57mm is quite a standard size. You will see this size with brands like Expobar, Vibiemme (VBM), La Scala, Bezzera, Faema and Azkoyen. This doesn’t mean that these brands don’t...
€3.33
E61 chromed group collector
The drain valve on this page can be used on various E61 style of brewing groups. Models such as ECm, ECM Heidelberg, La Pavoni, Rocket and Vibiemme espresso machines. Not on the Faema E61
This drain valve has been machined from a single piece of brass. After that it has been polished, nickel plated and finally chrome plated. This item is made in Italy....
€52.47
Vibiemme brewing group spray nozzle 21mm m6x1mm
The spray nozzle on this product page does look one which is common, but the thread size on this model is only used on various Vibiemme espresso machines. The VBM part reference number for this spray nozzle is RACCSPGRKO
The item itself is made from machined brass and has a diameter of 21mm. The thread on this item is a male M6 thread with a pitch...
€6.40
Stainless steel filter 8.6x22.5mm
The item on this product page is a stainless steel water filter, this filter is used with various espresso machine brands in the top of the brewing group. You can find this filter with brands such as ECM Heidelberg, San Remo, Vibiemme, La Scala, Bezzera, Grimac, Astoria, La Pavoni and wega.
This stainless steel water filter has a outer diameter of 8,5mm...
€2.77
Vibiemme solenoid group locking gasket
The group locking gasket on this product page is used with a variety Vibiemme solenoid groups. The Vibiemme part reference for this item is GUARGRKO.
This paper gasket is rectangular with 5 holes. The gasket is 72mm with 64 mm and a thickness of 2mm. This gasket has been made in Italy.
You can use this group locking gasket on the Vibiemme Evolution,...
€4.02
PTFE gasket 35x30x2mm
The gasket on this page is a Polytetrafluoroethylene (PTFE) gasket with the dimensions 35x30x2mm. This specific gasket is used on 3 specific places on the E61 style brewing group (the Faema E61 and Faema E61 legend group use a different size of ptfe gasket). It is used to seal off the top trumpet or drain sleeve, on the side of the group the camme holder...
€1.17
PTFE gasket 25.4x21.2x5.5mm
This flat Polytetrafluoroethylene (PTFE) gasket 25.5x21x5mm is used on Vibiemme (GUARCASUTEPI) espresso machine brewing groups. As well in the manual lever brewing group as well for the solenoid group. This part seals off the bottom off the upper sleeve in the brewing group.
If you are not sure if this item will fit your Vibiemme Domobar, Vibiemme Replica...
€4.01